OSHA Inspection: MICC CHICAGO, INC.

Issued

2017-05-12 00:00:00

Abate by

2017-05-18 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.501(b)(3): Each employee in a hoist area was not protected from falling 6 feet (1.8m) or more to lower levels by guardrail systems or personal fall arrest systems:      a) On or about April 24, 2017, employees were exposed to the hazard of falling approximately 18 feet (one commercial story) while hoisting materials and equipment to the edge of the roof deck where fall protection was not provided.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2017-05-12 00:00:00

Abate by

2017-05-18 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:        a) On or about April 24, 2017, employees were exposed to the hazard of falling approximately 18 feet (one commercial story) from the edge of the roof deck while engaged in roofing activities without the use of fall protection or a safety monitor.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.