OSHA Inspection: DESIGNER CRAFT WOODWORKING,INC.

Issued

2017-08-03 00:00:00

Abate by

2017-09-20 00:00:00

Penalty

Initial $2173.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.28(b)(11)(ii):     Each flight of stairs having at least 3 treads and at least 4 risers was not equipped with stair rail systems and handrails in accordance with Table D-2, Stairway Handrail Requirements:      The employer is failing to protect employees from fall hazards when ascending and descending the stairs used to access the break room.  This was most recently documented at 601 Commerce Rd. Lexington, Nebraska ,on or about April 26,2017.  Employees are utilizing an enclosed set of stairs that lead to the break room.  This set of stairs was not equipped with a hand rail, in accordance with this subpart.

Issued

2017-08-03 00:00:00

Abate by

2017-09-20 00:00:00

Penalty

Initial $3622.00 · Current $2500.00 Reduced

General-duty citation text

29 CFR 1910.106(d)(4)(i):     Opening(s) from inside flammable and combustible storage room(s) were not provided with approved self-closing fire doors. The inside flammable and combustible storage room(s) were not liquid-tight where the walls joined the floor:    The employer is failing to ensure that employees are protected from a potential fire hazard.  This was most recently documented at 601 Commerce Rd. Lexington Nebraska on or about April 26, 2017.  The flammable storage area door was not self-closing or constructed in such a manner as to make the room liquid tight (walls joined the floor).

Issued

2017-08-03 00:00:00

Abate by

2017-09-20 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.106(d)(4)(iv):     Every inside storage room was not provided with either a gravity or a mechanical exhaust ventilation system that provides for a complete change of air within the room at least six times per hour.      The employer is failing to protect employees from fire and explosion hazards.  This was most recently documented at 601 Commence Rd. Lexington, Nebraska on or about April 26, 2017.  The flammable storage room was not equipped with a ventilation system.

Issued

2017-08-03 00:00:00

Abate by

2017-09-20 00:00:00

Penalty

Initial $3622.00 · Current $2500.00 Reduced

General-duty citation text

29 CFR 1910.134(e)(1):     The employer will provide a medical evaluation to determine the employee's ability to use a respirator.     The employer is failing to ensure that employee(s) are not exposing to health hazards associated with wearing tight fitting respirators prior to being medically evaluated.  This was most recently documented  at 601 Commerce Rd. Lexington, Nebraska on or about April 26, 2017.  The employer failed to medical evaluate an employee prior to wearing a tight fitting respirator.

Issued

2017-08-03 00:00:00

Abate by

2017-09-20 00:00:00

Penalty

Initial $2897.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.242(b):     Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:    The employer is failing to ensure that employees are not exposed to eye injuries and air embolism. This was most recently documented at 601 Commerce Rd. Lexington, Nebraska on or about April 26, 2017 when employees are using compressed air for cleaning purposes at a pressure greater than 30 p.s.i.  The house air pressure on the compressor gauge showed 106 p.s.i.

Issued

2017-08-03 00:00:00

Abate by

2017-09-20 00:00:00

Penalty

Initial $3622.00 · Current $2500.00 Reduced

General-duty citation text

29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location:      a. The employer is failing to protect employees from a fire and explosion hazard.  This was most recently documented at 601 Commerce Rd. Lexington Nebraska on or about April 26, 2017. The room lighting used to illuminate the flammable storage area was not of the Class and Division required for this area.     b. The employer is failing to protect employees from a fire and explosion hazard.  This was most recently documented at 601 Commerce Rd. Lexington Nebraska on or about April 26, 2017. The electrical outlets behind the Rover A3 CNC router were not of a class and type appropriate for a potentially flammable dust area.