Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JUAN F. CHAPA DBA PCE ROOFING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JUAN F. CHAPA DBA PCE ROOFING, INC. in 103 N. PINE, ARLINGTON HEIGHTS, IL 60005 (NAICS 238160). OSHA activity number 342305075.

Watch Juan F. Chapa DBA PCE Roofing, INC. — free Get an email when a new federal OSHA severe-injury report for Juan F. Chapa DBA PCE Roofing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
103 N. PINE
City
ARLINGTON HEIGHTS
State
IL
ZIP
60005
Mailing
2916 W. CORNELIA AVENUE, WAUKEGAN, IL 60085
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.552 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2988.00 · Current $1427.00 Reduced
29 CFR 1926.552(a)(1):  The employer did not comply with the manufacturer's specifications and limitations applicable to the operation of all hoists and elevators:         a) On or about May 5, 2017, a material hoist was used for climbing to reach the roof surface where roofing work was being conducted.         In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1427
  • — Z (S) $2988

1926.300 B02

Repeat Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $4780.00 · Current $2535.00 Reduced
29 CFR 1926.300(b)(2): Moving part(s) of equipment exposed to contact by employees or which otherwise created a hazard, were not guarded:        a) On or about May 5, 2017, the belt and pulley on a ladder hoist used to hoist materials to the roof deck was not guarded to prevent contact with moving parts.     PCE Roofing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.300(b)(2) which was contained in OSHA inspection number 913561, citation 1, item 3, and was affirmed as a final order on July 18, 2013, with respect to a worksite located at 143 Abingdon Ave., Kenilworth, Illinois.          In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (R) $2535
  • — Z (R) $4780

1926.451 E01

Repeat Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $8366.00 · Current $4435.00 Reduced
29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet (0.6 m) above or below a point of access:         a) On or about May 5, 2017, employees were not provided with safe access to scaffolding from which they were required to work at an elevation of approximately 17 feet.    PCE Roofing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.451(e)(1) which was contained in OSHA inspection number 913561, citation 1, item 4, and was affirmed as a final order on July 18, 2013, with respect to a worksite located at 143 Abingdon Ave., Kenilworth, Illinois.          In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (R) $4435
  • — Z (R) $8366

1926.501 B13

Repeat Gravity 10 3 instances 3 exposed
Issued
Abate by
Penalty
Initial $8366.00 · Current $4435.00 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):       a) On or about May 5, 2017, employees were exposed to the hazard of falling while working from a pitched roof having a ground to eave height of approximately 20 feet without the use of fall protection.     PCE Roofing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13) which was contained in OSHA inspection number 913561, citation 1, item 8a, and was affirmed as a final order on July 18, 2013, with respect to a worksite located at 143 Abingdon Ave., Kenilworth, Illinois.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (R) $4435
  • — Z (R) $8366

1926.451 G01 I

Repeat Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system:       a) On or about May 5, 2017, employees were exposed to the hazard of falling approximately 17 feet while working from ladder jack scaffolding without the benefit of fall protection.  PCE Roofing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.451(g)(1)(i) which was contained in OSHA inspection number 913561, citation 1, item 8c, and was affirmed as a final order on July 18, 2013, with respect to a worksite located at 143 Abingdon Ave., Kenilworth, Illinois.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (R) $0
  • — Z (R) $0

1926.503 A01

Repeat Gravity 5 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $5976.00 · Current $3168.00 Reduced
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:       a) On nor about May 5, 2017, the employer did not provide training to enable employees to recognize the hazards of falling and the procedures to be followed to eliminate or control such hazards at the worksite.    PCE Roofing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.503(a)(1) which was contained in OSHA inspection number 913561, citation 1, item 9, and was affirmed as a final order on July 18, 2013, with respect to a worksite located at 143 Abingdon Ave., Kenilworth, Illinois.          In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (R) $3168
  • — Z (R) $5976

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342305075.