OSHA Inspection: SENSIDYNE, LP

Issued

2017-06-07 00:00:00

Abate by

2017-07-03 00:00:00

Penalty

Initial $3802.00 · Current $2281.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):   a) Production Area - An Alva Allen table top crimp press had an inadequately guarded point of operation, on or about May 12, 2017.

Issued

2017-06-07 00:00:00

Abate by

2017-07-03 00:00:00

Penalty

Initial $3802.00 · Current $2281.00 Reduced

General-duty citation text

29 CFR 1910.219(c)(4)(i): Shaft ends projecting more than one-half the diameter of the shaft were not guarded by nonrotating caps or safety sleeves.    a) Production Area - An Alva Allen table top crimp press had a 1 inch diameter shaft end that projected out 1.5 inches, on or about May 12, 2017.

Issued

2017-06-07 00:00:00

Abate by

2017-07-03 00:00:00

Penalty

Initial $3802.00 · Current $2281.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):   a) Production Area - An Alva Allen table top crimp press had inadequately guarded pulleys, on or about May 12, 2017.

Issued

2017-06-07 00:00:00

Abate by

2017-07-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):   a) Production Area - An Alva Allen table top crimp press had an inadequately guarded inclined belt, on or about May 12, 2017.