OSHA Inspection: STAR-LITE FABRICATION & GLASS, INC.

Issued

2017-09-01 00:00:00

Abate by

2017-10-05 00:00:00

Penalty

Initial $305.00 · Current $305.00

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Star-Lite Fabrication & Glass, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  Citation Number                Item Number                        Abatement Date      01                                    01                                        06/22/2017      01                                    02                                        06/22/2017   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2017-06-16 00:00:00

Abate by

2017-06-22 00:00:00

Penalty

Initial $2716.00 · Current $2716.00

General-duty citation text

29 CFR 1926.453(b)(2)(v):  A body belt was not worn and/or a lanyard was not attached to the boom or the basket when working from an aerial lift:    Note: As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system:     a)  On June 2, 2017, employees were exposed to the hazard of falling approximately 30 feet while working from the Genie S-60 aerial lift without wearing personal fall arrest equipment or a full body harness with a lanyard attached to the boom or basket.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2017-06-16 00:00:00

Abate by

2017-06-22 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     a)  On June 2, 2017, employees engaged in construction work were not protected from fall hazards while working at an elevation of approximately 30 feet above the ground.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.