Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ROBERTO IBARRA-SILVA

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROBERTO IBARRA-SILVA in 8709 STILLWATER RD, SHERWOOD, AR 72120 (NAICS 238130). OSHA activity number 342403664.

Watch Roberto Ibarra-Silva — free Get an email when a new federal OSHA severe-injury report for Roberto Ibarra-Silva is published. One employer, no account, unsubscribe in one click.
Site address
8709 STILLWATER RD
City
SHERWOOD
State
AR
ZIP
72120
Mailing
3388 DIAMOND HILL DR, ALEXANDER, AR 72002
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $1000.00 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:     On or about June 16, 2017 at or near 8709 Stillwater Rd, Sherwood, AR 721120, the employer exposed employees working on the ground to struck-by hazards by not providing them with hardhats to protect their heads from falling or flying objects that could cause physical harm.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3803

1926.102 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $1000.00 Reduced
29 CFR 1926.102(a)(1): 29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.     On or about June 16, 2017 at or near 8709 Stillwater Rd, Sherwood, AR 721120, the employer failed to provide safety glasses to employees operating nail guns during framing construction. This condition exposed employees to struck-by hazards from flying objects that could cause physical harm to their eyes.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3803

1926.451 B01 II

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $1000.00 Reduced
29 CFR 1926.451(b)(1)(ii): The platform was not planked or decked as fully as possible and the remaining open space between the platform and the uprights exceeded 9.5 inches (24.1 cm):    On or about June 16, 2017 and there prior at or near 8709 Stillwater Rd, Sherwood, AR 721120, the employer did not ensure that platforms were fully planked. Employees framing a single residential building worked on a platform with a single plank that was about 6 inches wide and had an approximately 20 inches opening to the wall.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3803

1926.451 B02

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(b)(2): Except as provided in paragraphs (b)(2)(i) and (b)(2)(ii) of this section, each scaffold platform and/or walkway was not at least 18 inches (46 cm) wide:  On or about June 16, 2017 and there prior at or near 8709 Stillwater Rd, Sherwood, AR 721120, the employer did not ensure that platforms were fully planked and at least 18 inches wide. The employer asked his employees framing a single residential building to work on a platform with a single plank that was about 6 inches wide.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 B05 I

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(b)(5)(i): The end of a platform 10 feet or less in length extended over its support more than 12 inches and the platform was not designed and installed so that the cantilevered portion of the platform is able to support employees and/or materials without tipping, or has guardrails which block employee access to the cantilevered end.  On or about June 16, 2017 and there prior at or near 8709 Stillwater Rd, Sherwood, AR 721120, the employer did not ensure that the cantilevered portion of the single planked platform was at most 12 inches or had guardrails to block employees from accessing the cantilevered end. The cantilevered portion of the platform was more than 24 inches, creating a potential tipping and fall hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.501 B13

Serious Gravity 10 2 instances 5 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $1000.00 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    On or about June 16, 2017 at or near 8709 Stillwater Rd, Sherwood, AR 721120, employees were exposed to the following fall hazards:-     The employer exposed employees that were framing a rooftop about 13 ft 8 in to fall from height hazards. Employees were working on a 12/12 pitched roof without any type of fall protection.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3803

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342403664.