Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JDB DESIGNS, LLC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JDB DESIGNS, LLC. in 9393 CINCINNATI COLUMBUS RD, WEST CHESTER, OH 45069 (NAICS 541990). OSHA activity number 342462793.

Watch JDB Designs, LLC. — free Get an email when a new federal OSHA severe-injury report for JDB Designs, LLC. is published. One employer, no account, unsubscribe in one click.
Establishment
JDB DESIGNS, LLC.
Site address
9393 CINCINNATI COLUMBUS RD
City
WEST CHESTER
State
OH
ZIP
45069
Mailing
2286 US HIGHWAY 50, BATAVIA, OH 45103
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
541990
Employees
1
Ownership type
A

3 citations on file for this inspection.

1910.22 D01

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $0.00 Reduced
29 CFR 1910.22(d)(1): (1) Walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition;  On July 12, 2017, there were no regular inspections being performed by the employer to ensure walking-working surfaces at the jobsite, such as the aerial lift platform, were being maintained in a safe condition.   Located on the east side of a commercial structure, an employee was observed working from a Genie S-65 extendable boom lift without being attached to the boom or basket. Potential fall heights were measured to be greater than 16 feet above the concrete surface below.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3803

1910.30 A01

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $0.00 Reduced
29 CFR 1910.30(a)(1): (a) Fall hazards. (1) Before any employee is exposed to a fall hazard, the employer must provide training for each employee who uses personal fall protection systems or who is required to be trained as specified elsewhere in this subpart.  Employers must ensure employees are trained in the requirements of this paragraph on or before May 17, 2017.  On July 12, 2017, an employee observed working from a Genie S-65 extendable boom lift, without being attached to the boom or basket, that was not provided training to recognize the associated fall hazards & equipment hazards; and to understand the procedures to control or minimize those hazards. Potential fall height was measured to be greater than 16 feet above the concrete surface below while not utilizing a fall protection system.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3803

1910.67 C02 V

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $3803.00 · Current $0.00 Reduced
29 CFR 1910.67(c)(2)(v): (v) A personal fall arrest or travel restraint system that meets the requirements in 29 CFR part 1910, subpart I, shall be worn and attached to the boom or basket when working from an aerial lift.  On July 12, 2017, located on the east side of a commercial structure, an employee was observed working from a Genie S-65 extendable boom lift without being attached to the boom or basket. Potential fall heights were measured to be greater than 16 feet above the concrete surface below.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3803

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342462793.