Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CCT USA LP

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CCT USA LP in 300 N. PALMER ST., HOUSTON, TX 77003 (NAICS 424610). OSHA activity number 342468964.

Watch CCT USA LP — free Get an email when a new federal OSHA severe-injury report for CCT USA LP is published. One employer, no account, unsubscribe in one click.
Establishment
CCT USA LP
Site address
300 N. PALMER ST.
City
HOUSTON
State
TX
ZIP
77003
Mailing
24 GREENWAY PLAZA #808, HOUSTON, TX 77046
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
424610
Employees
14
Ownership type
A

7 citations on file for this inspection.

1910.37 A03

Serious Gravity 5 2 instances 7 exposed
Issued
Abate by
Penalty
Initial $3622.00 · Current $2173.00 Reduced
29 CFR 1910.37(a)(3): Exit routes were not free and unobstructed. Materials or equipment was placed, either permanently or temporarily, within the exit route:    a) CCT USA LP: On July 14th, 2017 and at times prior to, the employer did not ensure two exit doors located at the North-east corner of the CCT facility were maintained in a free and unobstructed condition. One of the exit doors was locked with a padlock; the other exit door was blocked with company boxes.
Recent events (3)
  • — F (S) $2173
  • — C (S) $3622
  • — Z (S) $3622

1910.178 A04

Serious Gravity 1 7 instances 7 exposed
Issued
Abate by
Penalty
Initial $2173.00 · Current $1303.00 Reduced
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation were performed by the customer or user without manufacturers prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals were not changed accordingly.    a) CCT USA LP:  On July 14, 2017 and at times prior to, the employer authorized modifications and additions which affect capacity and safe operations of at least two (2) powered industrial trucks (Nissan Powered industrial truck - model number MCPLO2A25LV, Nissan Powered industrial truck - Model Number MCP1F2A25V) without the manufacturer's prior written approval or a registered engineer's written approval. This condition exposes employees to struck-by and crushing hazards.
Recent events (3)
  • — F (S) $1303
  • — C (S) $2173
  • — Z (S) $2173

1910.178 L06

Serious Gravity 5 7 instances 7 exposed
Issued
Abate by
Penalty
Initial $3622.00 · Current $2173.00 Reduced
29 CFR 1910.178(l)(6): Certification. The employer did not certify that each operator had been trained and evaluated as required by this paragraph (l).     a) On July 14th 2017 and at times prior to, CCT's employees were exposed to struck-by hazards in that CCT did not certify that employees who operate the company's power industrial truck had been trained and evaluated in accordance with OSHA regulations
Recent events (3)
  • — F (S) $2173
  • — C (S) $3622
  • — Z (S) $3622

1910.178 L04 III

Serious Gravity 5 6 instances 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years.  a) On July 14 2017 and at times prior to, CCT employees who operate the company's power industrial trucks were not evaluated every three years to ensure safe operation of powered industrial trucks This condition exposes employees to struck-by hazards.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.242 B

Serious Gravity 10 7 instances 7 exposed
Issued
Abate by
Penalty
Initial $5070.00 · Current $3009.00 Reduced
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. and was not used with effective chip guarding and personal protective equipment.    a) On July 14, 2017 and at times prior to, CCTs employees were exposed to struck-by hazards and air embolism while using a portable air compressor with a discharge pressure of 70psi on their body for cleaning purposes
Recent events (3)
  • — F (S) $3009
  • — C (S) $5070
  • — Z (S) $5070

1910.1200 E01

Serious Gravity 10 6 instances 6 exposed
Issued
Abate by
Penalty
Initial $5070.00 · Current $3030.00 Reduced
29 CFR 1910.1200(e)(1): Employers did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met:    a) On July 14 2017 and at times prior to, CCT did not develop and implement a written hazard communication program. Employees handle hazardous chemicals such as but not limited to DuPont POL VC, Marlex EHM 6007 Polyethylene, and Propane Tanks
Recent events (3)
  • — F (S) $3030
  • — C (S) $5070
  • — Z (S) $5070

1910.157 E03

Other-than-serious 3 instances 7 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.157(e)(3): The employer did not assure that portable fire extinguishers were subjected to an annual maintenance check:  a) On July 14, 2017 and times prior, CCT did not ensure that at least three (3) AMERX fire extinguishers inside the facility were subject to annual maintenance checks. This condition exposes employees to fire hazards
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342468964.