OSHA Inspection: PEPE MARTINEZ

Issued

2018-07-19 00:00:00

Abate by

2018-08-14 00:00:00

Penalty

Initial $311.00 · Current $311.00

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  a) On or about July 18, 2018, the employer failed to submit certification of corrective action for citation 1, item 1,  issued on 12/04/2017, with an abatement due date of 12/29/2017.   b) On or about July 18, 2018, the employer failed to submit certification of corrective action for citation 1, item 2,  issued on 12/04/2017, with an abatement due date of 12/29/2017.   c) On or about July 18, 2018, the employer failed to submit certification of corrective action for citation 1, item 3,  issued on 12/04/2017, with an abatement due date of 12/29/2017.

Issued

2018-07-19 00:00:00

Abate by

2018-08-14 00:00:00

Penalty

Initial $311.00 · Current $311.00

General-duty citation text

29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  a) On or about July 18, 2018, the employer failed to submit documentation and certification of corrective action for citation 1, item 1,  issued on 12/04/2017, with an abatement due date of 12/29/2017.   b) On or about July 18, 2018, the employer failed to submit documentation and certification of corrective action for citation 1, item 2,  issued on 12/04/2017, with an abatement due date of 12/29/2017.   c) On or about July 18, 2018, the employer failed to submit documentation and certification of corrective action for citation 1, item 3,  issued on 12/04/2017, with an abatement due date of 12/29/2017.

Issued

2017-12-04 00:00:00

Abate by

2017-12-29 00:00:00

Penalty

Initial $2173.00 · Current $2173.00

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  On or about August 23, 2017:  a) Employee installing gable ends on a new residential structure was exposed to a fall hazard of approximately 11 feet, when the employer failed to ensure that the employee was using proper fall protection measures.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2017-12-04 00:00:00

Abate by

2017-12-29 00:00:00

Penalty

Initial $2716.00 · Current $2716.00

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  On or about August 23, 2017:  a) The employer failed to ensure that employees were properly trained in the recognition, reduction and elimination of a fall hazard of approximately 11 feet that the employee was exposed to while installing a gable of a new residential structure.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2017-12-04 00:00:00

Abate by

2017-12-29 00:00:00

Penalty

Initial $2173.00 · Current $2173.00

General-duty citation text

29 CFR 1926.1053(a)(3)(i): Rungs, cleats, and steps of fixed ladders were spaced more than 14 inches (36 cm) apart, as measured along the ladder's side rails:(a)(LOCATION)(IDENTIFY SPECIFIC OPERATION(S) AND/OR CONDITIONS)  On or about August 23, 2017:  a) Employees utilizing a job made ladder were exposed to fall hazards of up to approximately 11 feet, when the rungs of the ladder were over 14 inches apart.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).