OSHA Inspection: EAGLE ENTERPRISES LLC

Issued

2017-09-28 00:00:00

Abate by

2017-10-25 00:00:00

Penalty

Initial $2173.00 · Current $1085.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:     (a)  Shop:  On August 30, 2017 and times prior, the employer did not ensure that machine guarding was provided on a Jet JMD-18 drill press (serial #6102374) to protect employees from the rotating chuck and the unused portion of the bit.

Issued

2017-09-28 00:00:00

Abate by

2017-11-01 00:00:00

Penalty

Initial $1630.00 · Current $815.00 Reduced

General-duty citation text

29 CFR 1910.1200(e)(1):   The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:      (a) Welding Area:  On August 30, 2017 and times prior to, employees conduct the welding on aluminized steel are exposed to welding fumes including but not limited to, aluminum fume, zinc oxide fume, copper fume and magnesium fume.  The employer has not developed or implemented a written hazard communication program for employees protection from welding fumes.        ABATEMENT NOTE:  A written program shall include a description of how the criteria for the following will be met:   1.        Labeling and other forms of warnings;   2.        Safety Data Sheets;   3.        Employee information and training.        Additionally, a list of hazardous chemicals known to be present in the workplace must be compiled.  Methods used to inform employees of the hazards associated with non-routine tasks and the informing of contractors of workplace hazards, including a description of the labeling system used in the facility and the availability of safety data sheets must also be addressed.  The written program must be made available upon request.

Issued

2017-09-28 00:00:00

Abate by

2017-11-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) Welding Area:  On August 30, 2017 and times prior to, employees conduct the welding on aluminized steel are exposed to welding fumes including but not limited to, aluminum fume, zinc oxide fume, copper fume and magnesium fume.  The employer has not provided training to employees on the hazards associated with the welding fumes.

Issued

2017-09-28 00:00:00

Abate by

2017-11-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a  (a)  Facility Wide:  On August 30, 2017 and times prior to, employees operate a Honda forklift to move products throughout the facility.  The employer has not ensured that each employee was trained and certified prior to allowing employee forklift operation.