Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SWILLY, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of SWILLY, INC. in 924 ROLLING PASS, GLENVIEW, IL 60025 (NAICS 238110). OSHA activity number 342631017.

Watch Swilly, INC. — free Get an email when a new federal OSHA severe-injury report for Swilly, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
SWILLY, INC.
Site address
924 ROLLING PASS
City
GLENVIEW
State
IL
ZIP
60025
Mailing
386 HIGHVIEW, ELMHURST, IL 60126
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238110
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.21 B02

Serious Gravity 10 4 instances 4 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $2475.00 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:       a) On or about September 12, 2017, the employer did not instruct or provide instruction to employees in the recognition and avoidance of unsafe conditions and the regulations applicable to their work environment to control or minimize the hazards associated with their work.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2475
  • — Z (S) $3803

1926.100 A

Serious Gravity 5 4 instances 4 exposed
Issued
Abate by
Penalty
Initial $3259.00 · Current $2120.00 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:         a) On or about September 12, 2017, employees were exposed to head injury while working in an excavation and around heavy machinery/equipment without protective helmets.         In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $2120
  • — Z (S) $3259

1926.651 K01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $2475.00 Reduced
29 CFR 1926.651(k)(1): An inspection of the excavations, the adjacent areas, and protective systems was not conducted by the competent person prior to the start of work and as needed throughout the shift:       a) On or about September 12, 2017, the employer did not have a competent person conduct inspections prior to the start of work and as needed throughout the shift during trenching and excavation work.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2475
  • — Z (S) $3803

1926.652 A01

Serious Gravity 10 4 instances 4 exposed
Issued
Abate by
Penalty
Initial $3803.00 · Current $0.00 Reduced
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652 (b) or (c) of this section:           a) On or about September 12, 2017, employees were exposed to cave-in and struck-by hazards while preparing footings without being protected from cave-ins by adequate shoring, sloping, or other protective means when working along vertical excavation walls at a depth of approximately 9 feet.         In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation; item f (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3803

1926.1053 B16

Serious Gravity 5 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $2173.00 · Current $1380.00 Reduced
29 CFR 1926.1053(b)(16): Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, were not either immediately marked in a manner that readily identifies them as defective, or tagged with "Do Not Use" or similar language, and were not withdrawn from service until repaired:        a) On or about September 12, 2017, a fiberglass extension ladder provided for use had damaged rails.        In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1380
  • — Z (S) $2173

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342631017.