Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

TIOGA, TX —

OSHA Inspection: CEDAR DEPOT

Complaint inspection · Health discipline

At a glance

On , OSHA opened a complaint health inspection of CEDAR DEPOT in 1965 US 377, TIOGA, TX 76271 (NAICS 321113). OSHA activity number 342685252.

Watch Cedar Depot — free Get an email when a new federal OSHA severe-injury report for Cedar Depot is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
CEDAR DEPOT
Site address
1965 US 377
City
TIOGA
State
TX
ZIP
76271
Mailing
1965 US 377, TIOGA, TX 76271

What kind of inspection was it?

Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
321113
Employees
5
Ownership type
A

Citations

7 citations on file for this inspection.

1910.95 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2217.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.95(c)(1):  A continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (n) was not instituted when employee noise exposures equaled or exceeded an 8-hour time-weighted average sound level (TWA) of 85 dBA:       In the cutting area, employees were exposed to continuous noise level at 84.3% of the allowable 8-hour time-weighted average sound level (85 dBA). The equivalent dBA level of 84.3% is approximately 88.7 dBA. The sampling was performed for 400 minutes during one shift on October 26, 2017. Zero exposure was assumed for the 80 minutes not sampled.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2217

1910.134 K

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1663.00 · Current $700.00 Reduced

General-duty citation text

29 CFR 1910.134(k): 29 CFR 1910.134(k): The employer did not provide the information on respirators in accordance to Appendix D of the section to employees who wear respirators when not required by this section or by the employer to do so:        In the cutting area, the employer did not ensure that employees using 3M N95 particulate respirators were provided copy of Appendix D. Employees were potentially exposed to respiratory hazards when performing tasks such as, but not limited to wood cutting operations.
Recent events (2)
  • — I (S) $700
  • — Z (S) $1663

1910.178 L04 I

Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1663.00 · Current $700.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(4)(i): Refresher training, including an evaluation of the effectiveness of that training, was not conducted as required by paragraph (l)(4)(ii) to ensure that the operator has the knowledge and skills needed to operate the powered industrial truck safely.       In the manufacturing area, the employer did not have any documentation of powered industrial training and/or evaluation to ensure that the operator has the knowledge and skills needed to safely operate the forklift truck.
Recent events (2)
  • — I (S) $700
  • — Z (S) $1663

1910.212 A01

Deleted Serious Gravity 1 2 instances 3 exposed
Issued
Abate by
Penalty
Initial $1663.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1):  Machine guarding was not provided to protect operator(s) and other employees in the machine shop from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks;                                                                                                               a) In the machine shop, employees operated a 6" bench buffer serial number 8080902316 with no guard over rotating parts exposing employees to struck-by hazards.    b) In the machine shop, employees operated a Porter Cable drill press s/n 072029 with out a blade guard over rotating parts and exposed to caught-in and laceration hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1663

1910.212 B

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $600.00

General-duty citation text

29 CFR 1910.212(b):  Machine designed for a fixed location was not securely   anchored to prevent walking and moving chips and sparks:                                                                                                                                                                                                                    In the machine shop, employees operated Porter Cable drill press s/n 072029 was not securely anchored to prevent moving and walking exposing employees to struck by hazard from top heavy machine.
Recent events (2)
  • — I (S) $600
  • — Z (S) $0

1910.215 A04

Deleted Serious Gravity 1 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1663.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4):  Work rest(s) on grinding machinery were not adjusted  closely to the wheel with a maximum opening of one eighth inch:    In the machine shop, employees operated Black & Decker grinder serial number 9537 and the employer did not ensure the work rest on the left wheel and the right wheel was adjusted closely to the wheel exposing employees to hazards associated with contacting the rotating parts of the machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1663

1910.215 B09

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9):  The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:                                                                                                               In the machine shop, employees operated Black & Decker grinder serial number 9537 without a tongue guard installed on the left side exposing employees to struck-by hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

More inspections in this industry (NAICS 321113)

More inspections in TX

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342685252.