Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DENNIS UMBERGER DBA UMBERGER MASONRY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DENNIS UMBERGER DBA UMBERGER MASONRY in 116 SOUTH SPRUCE ST., NOKOMIS, IL 62075 (NAICS 238140). OSHA activity number 342696564.

Watch Dennis Umberger DBA Umberger Masonry — free Get an email when a new federal OSHA severe-injury report for Dennis Umberger DBA Umberger Masonry is published. One employer, no account, unsubscribe in one click.
Site address
116 SOUTH SPRUCE ST.
City
NOKOMIS
State
IL
ZIP
62075
Mailing
626 EAST HALLER, NOKOMIS, IL 62075
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

3 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $311.00 · Current $311.00
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.  a)  For Citation 1, Item 1, issued on 12/5/2017 with an abatement date of 12/11/2017, the employer did not certify the complete abatement of the cited violation.  b)  For Citation 1, Item 2, issued on 12/5/2017 with an abatement date of 12/11/2017, the employer did not certify the complete abatement of the cited violation.
Recent events (1)
  • — Z (O) $311

1926.451 E06 VI

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2716.00 · Current $2716.00
29 CFR 1926.451(e)(6)(vi): 29 CFR 1926.451(e)(6)(vi): Integral prefabricated scaffold access frames did not have a maximum spacing between rungs of 16 3/4 inches (43 cm). Non-uniform rung spacing caused by joining end frames together is allowed, provided the spacing does not exceed 16 3/4 inches (43 cm).  The employer did not ensure that employee access to the scaffold had a maximum rung spacing of 16 3/4 inches.  The employees were accessing the scaffold by using the scaffold rungs that were measured at approximately twenty (20) inches.  This resulted in the employees being exposed to a fall hazard of approximately twenty (20) feet to the ground.
Recent events (1)
  • — Z (S) $2716

1926.451 G04

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2716.00 · Current $2716.00
29 CFR 1926.451(g)(4): Guardrail systems installed to meet the requirements of this section did not comply with the provisions listed in subparagraphs (i) through (xv) of this paragraph.  The employer did not ensure that guardrails were installed on the open side of the scaffold when employees were using it as work surface.  This resulted in the employees being exposed to a fall hazard of approximately twenty (20) feet to the ground.
Recent events (1)
  • — Z (S) $2716

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342696564.