Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JASON KEMPSKI

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JASON KEMPSKI in 50 ELK STREET, BUFFALO, NY 14210 (NAICS 238160). OSHA activity number 342728599.

Watch Jason Kempski — free Get an email when a new federal OSHA severe-injury report for Jason Kempski is published. One employer, no account, unsubscribe in one click.
Establishment
JASON KEMPSKI
Site address
50 ELK STREET
City
BUFFALO
State
NY
ZIP
14210
Mailing
80 ROSEMONT DRIVE, AMHERST, NY 14226
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

2 citations on file for this inspection.

1926.501 B10

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $2716.00 · Current $700.00 Reduced
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system:      a) On or about 10/20/17, on the roof of a building at 50 Elk Street, Buffalo, NY:  Employees were engaged in the installation of an EPDM roofing system on the flat roof of the building that was approx. 22 ft. above the ground.   Among other fall protection systems permitted by the standard, the employer chose to use a combination of warning line system and safety monitoring system to protect employees from falling off the roof.  However, in some areas of the roof , the warning line was not present, and in other areas the warning line had sagged to less than the required  34 inches above the surface.  Additionally, the employees were spread out in different areas of the roof at times, and were not being watched by a designated monitor at all times.  The monitor sometimes had his back to employees that he was monitoring, and was also doing other things such a moving warning lines around & refastening the warning lines to the stanchions. This took his attention away from the monitoring function.      NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $700
  • — C (S) $2716
  • — Z (S) $2716

1926.1052 A03

Serious Gravity 5 1 instance 4 exposed
Issued
Penalty
Initial $2173.00 · Current $700.00 Reduced
29 CFR 1926.1052(a)(3): Riser height and/or tread depth was not uniform within each flight of stairs, including any foundation structure used as one or more treads of the stairs:      a) On or about 10/20/17, on the stairway used to access the roof of a building at 50 Elk Street, Buffalo, NY:  Employees  used  a metal stairway to access and exit the roof. The stair that was supposed to be in place just below the landing was missing, exposing an opening that employees could step into.      NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $700
  • — C (S) $2173
  • — Z (S) $2173

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342728599.