Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: JOINT SYSTEMS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JOINT SYSTEMS, INC. in 3455 NANTUCKET CIR, LOVELAND, OH 45140 (NAICS 238390). OSHA activity number 342845468.

Watch Joint Systems, INC. — free Get an email when a new federal OSHA severe-injury report for Joint Systems, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
JOINT SYSTEMS, INC.
Site address
3455 NANTUCKET CIR
City
LOVELAND
State
OH
ZIP
45140
Mailing
8932 MANOR LOOP #201, LAKEWOOD RANCH, FL 34202
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238390
Employees
1
Ownership type
A

2 citations on file for this inspection.

1926.453 B02 V

Serious Gravity 10 1 instance 1 exposed
Issued
Penalty
Initial $3880.00 · Current $1940.00 Reduced
29 CFR 1926.453(b)(2)(v): A body belt shall be worn and a lanyard attached to the boom or basket when working from an aerial lift.    Note to paragraph (b)(2)(v): As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system. The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated under 1926.502(e).    On Dec. 21, 2017, located on the north side of a commercial structure, an employee was observed working from a JLG 660SJ extendable boom lift without being attached to the boom or basket. Potential fall heights were measured to be greater than 12 feet above the ground below.
Recent events (2)
  • — I (S) $1940
  • — Z (S) $3880

1926.454 A

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3880.00 · Current $1940.00 Reduced
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include the following areas, as applicable:    On Dec. 21, 2017, an employee was observed working from a JLG 660SJ extendable boom lift, without being attached to the boom or basket, that was not provided training to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. Potential fall height was measured to be greater than 12 feet above the ground below.
Recent events (2)
  • — I (S) $1940
  • — Z (S) $3880

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342845468.