OSHA Inspection: DUSOBOX CORPORATION

Issued

2018-06-15 00:00:00

Abate by

2018-08-02 00:00:00

Penalty

Initial $3880.00 · Current $2328.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:   a) On or about 01/17/2018 at building 2501, employees working with machines such as, but not limited to, lathe machines, grinder and conveyors were not provided with an energy control (lockout / tag out) program.

Issued

2018-06-15 00:00:00

Penalty

Initial $3880.00 · Current $2328.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):   a) On or about 01/17/2018 at building 2501 production area, an employee working close to one of the conveyor of the S&S Flexographic machine that folds and creates boxes, machine guarding for the conveyor's pulley motor was not provided exposing employees to a caught-by hazard.

Issued

2018-06-15 00:00:00

Abate by

2018-07-12 00:00:00

Penalty

Initial $3880.00 · Current $2328.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:    a) On or about 01/17/2018, in the Maintenance shop the abrasive wheels work rests for the Dayton 10" bench grinders, serial# 4Z911C were missing, therefore exposing an employee to a struck-by hazard.

Issued

2018-06-15 00:00:00

Abate by

2018-07-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch   a) On or about 01/17/2018, in the Maintenance shop - the abrasive wheels adjustable tongue guards for the Dayton 10" bench grinder Serial # 4Z911C , were missing, therefore, exposing an employee to a struck-by hazard.

Issued

2018-06-15 00:00:00

Abate by

2018-08-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.37(b)(4): Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent:     a) On or about 01/17/2018 at building 2501 in the production/warehouse area, no directional exit signs were posted, exposing employees to a fire hazard.