OSHA Inspection: JJH OF NY CORP

Issued

2018-05-10 00:00:00

Abate by

2018-05-16 00:00:00

Penalty

Initial $2217.00 · Current $2217.00

General-duty citation text

29 CFR 1926.56(a): While work was in progress, construction areas, ramps, runways, corridors, offices, shops or storage areas were not lighted to the minimum illumination intensities as listed in Table D-3 of 29 CFR 1926.56:(a)  a)  At the jobsite, in the storage area/passage way, on or about 1/25/18:  Employees were using this area to transit to and from the storefront and the storage area without illumination where 5 foot candles is required.

Issued

2018-05-10 00:00:00

Abate by

2018-06-14 00:00:00

Penalty

Initial $3326.00 · Current $3326.00

General-duty citation text

29 CFR 1926.59: 29 CFR 1926.59:  An employer engaged in construction activities did not comply with the requirements set forth in Part 1910, Section 1200, Hazard Communication:  a)  At the jobsite, on or about 1/25/18:  Employees were using chemicals without a written program, without access to SDS documents, and without being trained on the hazards associated with chemicals, use of PPE, or reading an SDS.

Issued

2018-05-10 00:00:00

Abate by

2018-05-16 00:00:00

Penalty

Initial $3326.00 · Current $3326.00

General-duty citation text

29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section.  a)  At the jobsite, on or about 1/25/18:  Employees were using a hand held grinder without a guard.

Issued

2018-05-10 00:00:00

Abate by

2018-05-16 00:00:00

Penalty

Initial $3326.00 · Current $3326.00

General-duty citation text

29 CFR 1926.403(b)(1)(i): Safety of equipment was not determined on the basis of suitability of the equipment for an identified purpose as evidenced by listing, labeling, or certification for that identified purpose.  a)  At the jobsite, on or about 1/25/18:  Employees were using power tools, connected to and powered by a metal quad box that was not attached to a solid surface but laid on the floor.

Issued

2018-05-10 00:00:00

Abate by

2018-05-16 00:00:00

Penalty

Initial $3880.00 · Current $3880.00

General-duty citation text

29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50-volts or more were not guarded against accidental contact:  a)  At the jobsite, on or about 1/25/18:  Employees were exposed to live electrical parts inside the stock room where a live service panel was not guarded.