1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: DIXIE WELD FAB, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DIXIE WELD FAB, INC. in 305 CADDO STREET, BELCHER, LA 71004 (NAICS 332114). OSHA activity number 342914496.

Watch Dixie Weld FAB, INC. — free Get an email when a new federal OSHA severe-injury report for Dixie Weld FAB, INC. is published. One employer, no account, unsubscribe in one click.
Site address
305 CADDO STREET
City
BELCHER
State
LA
ZIP
71004
Mailing
PO BOX 271, BELCHER, LA 71004
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332114
Employees
25
Ownership type
A

4 citations on file for this inspection.

1910.22 A01

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $2661.00 · Current $373.00 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition:    On or about 1/31/18 in the Old Shop near the Wysong Shear; the employer allowed employees to work near piles of old scrap metal, motors, pallets of motors and other surplus equipment spread far and wide; thus exposing employees to dust and other trip and fall hazards.
Recent events (2)
  • — I (O) $373
  • — Z (S) $2661

1910.147 C04 II B

Deleted Serious Gravity 5 3 instances 2 exposed
Issued
Abate by
Penalty
Initial $2661.00 · Current $0.00 Reduced
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.  On or about 1/31/18 in the Old Shop on the Wysong Shear and in the Butler Building on the Messer Plasma-Cutting and the Water Jet machines; the employer allowed employees to perform servicing on the machines and the employees were not provided with machine-specific procedures to lockout the equipment.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2661

1910.212 A01

Other-than-serious 1 instance 2 exposed
Issued
Penalty
Initial $2661.00 · Current $373.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation.    On or about 1/31/18 in the Butler Street Building; the employer allowed employees (non-operator) to work in the area of the of the Niagra Press Brake without guarding the rear of the press brake.
Recent events (2)
  • — I (O) $373
  • — Z (S) $2661

1910.303 G01

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $373.00 · Current $373.00
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  On or about 1/31/18 in the Old Shop near the Wysong Shear; the employer allowed piles of old scrap metal, motors, pallets of motors and other surplus equipment to be stored directly and next to the two #4800 electrical panels; thus exposing employees to delays in accessing the electrical boxes.
Recent events (2)
  • — I (O) $373
  • — Z (O) $373

View DIXIE WELD FAB, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342914496.