Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SOUTHERN FRAME & ALIGNMENT, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of SOUTHERN FRAME & ALIGNMENT, INC. in 4380 MOBILE HWY, MONTGOMERY, AL 36108 (NAICS 811198). OSHA activity number 342956125.

Watch Southern Frame & Alignment, INC. — free Get an email when a new federal OSHA severe-injury report for Southern Frame & Alignment, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4380 MOBILE HWY
City
MONTGOMERY
State
AL
ZIP
36108
Mailing
4380 MOBILE HWY, MONTGOMERY, AL 36108
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811198
Employees
10
Ownership type
A

4 citations on file for this inspection.

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2217.00 · Current $1300.00 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  (a) Repair shop: On or about February 13, 2018 and at times prior thereto the employer exposed employees to chemical hazards in that employees were allowed to use products that contain hazardous chemicals such as but not limited to: Compressed oxygen gas; Compressed acetylene gas; Lead adhesive weights strips; Hydraulic fluid; Transmission fluid and lithium grease without being provided with a written hazard communications program.
Recent events (2)
  • — I (S) $1300
  • — Z (S) $2217

1910.1200 G08

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):  (a) Repair shop: On or about February 13, 2018 and at times prior thereto the employer failed to maintain and make readily available Safety Data Sheets (SDS) for employees who are required to use products containing hazardous chemicals including but not limited to Lead adhesive weights strips, Compressed oxygen gas, Compressed acetylene gas, transmission fluid, hydraulic fluid and lithium grease.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) Repair shop: On and about February 13, 2018 and at times prior thereto the employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.132 D02

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:  (a) Repair shop: On or about February 13, 2018 and at times prior thereto the employer failed to have a written job hazard assessment to determine the kind of personal protective equipment that the employees needed to perform specific tasks.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342956125.