Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CHARGING TECHNOLOGIES, INC.

Follow-up inspection · Safety discipline

On , OSHA opened a follow-up safety inspection of CHARGING TECHNOLOGIES, INC. in 4328 BRIDGETON INDUSTRIAL DRIVE, BRIDGETON, MO 63044 (NAICS 335999). OSHA activity number 342993284.

Watch Charging Technologies, INC. — free Get an email when a new federal OSHA severe-injury report for Charging Technologies, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4328 BRIDGETON INDUSTRIAL DRIVE
City
BRIDGETON
State
MO
ZIP
63044
Mailing
4328 BRIDGETON INDUSTRIAL DRIVE, BRIDGETON, MO 63044
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
335999
Employees
22
Ownership type
A

5 citations on file for this inspection.

1910.137 C02 II

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $5691.00 · Current $4691.00 Reduced
29 CFR 1910.137(c)(2)(ii): Insulating equipment was not inspected for damage before each day's use and immediately following any incident that can reasonably be suspected of causing damage.  Insulating gloves shall be given an air test, along with the inspection:    Within the Production Department located at 4328 Bridgeton Industrial Park Drive, Bridgeton, Missouri:      Insulating gloves were not inspected for damage before each day's use for employees performing electrical tests with voltages ranging between 120 VAC and 2,500 VAC, during the following, but not limited to, forklift battery charger production processes:  a.  The in-process inspection procedures for transformers,   b.  The final assembly electrical tests.
Recent events (3)
  • — J (S) $4691
  • — C (S) $5691
  • — Z (S) $5691

1910.137 C02 VII

Serious Gravity 10 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.137(c)(2)(vii): Protective gloves were not worn over insulating gloves.  Within the Production Department located at 4328 Bridgeton Industrial Park Drive, Bridgeton, Missouri:    Protective gloves were not worn over insulating gloves to prevent damage for employees performing electrical tests with voltages ranging between 120 VAC and 2,500 VAC, during the following, but not limited to, forklift battery production process: a.  The in-process inspection procedures for transformers,  b.  The final assembly electrical tests.    In the alternative,  1910.335(a)(1)(iii) When the insulating capability of protective equipment may be subject to damage during use, the insulating material was not protected.
Recent events (3)
  • — J (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.137 C02 VIII

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.137(c)(2)(viii): Electrical protective equipment shall be subjected to periodic electrical tests. Test voltages and the maximum intervals between tests shall be in accordance with Table I-4 and Table I-5:  Within the Production Department located at 4328 Bridgeton Industrial Park Drive, Bridgeton, Missouri:    The employer did not ensure that electrically insulated gloves that were provided to workers had been tested prior to first issue and within the maximum intervals in accordance with Table I-5.
Recent events (3)
  • — J (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.333 C02

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $5691.00 · Current $4691.00 Reduced
29 CFR 1910.333(c)(2): The employer did not ensure that qualified persons were capable of working safely on energized circuits and were familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools.    Location:  Within the Production Department located at 4328 Bridgeton Industrial Park Drive, Bridgeton, Missouri:      Employees performing component electrical tests during the production of forklift battery chargers were not familiar with the proper use of precautionary techniques and personal protective equipment required while performing electrical tests with voltages ranging between 120 VAC and 2,500 VAC, during the following, but not limited to, forklift battery production process:  a.  The in-process inspection procedures for transformers,   b.  The final assembly electrical tests.
Recent events (3)
  • — J (S) $4691
  • — C (S) $5691
  • — Z (S) $5691

1910.212 A03 II

Deleted Repeat Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $8130.00 · Current $0.00 Reduced
29 CFR 1910.212(a)(3)(ii):  Point(s) of operation (P.O.O.) of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycles:  Within the Transformer Department located at 4328 Bridgeton Industrial Park Drive, Bridgeton, Missouri:       The points of operation for the two T & B Crimper Machines, m/n C13600 were inadequately guarded.    The Ferro Magnetics Corporation was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(3)(ii), which was contained in OSHA inspection number 1007955, citation number 1, item number 9 and was affirmed as a final order on December 21, 2015, with respect to a workplace located at 4328 Bridgeton Industrial Park Drive, Bridgeton, Missouri.
Recent events (3)
  • — J (R) $0
  • — C (R) $8130
  • — Z (R) $8130

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342993284.