Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ALPINE CRAFTSMAN & PRODUCTION, LLC

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of ALPINE CRAFTSMAN & PRODUCTION, LLC in 1136 STEAMBOAT BLVD., STEAMBOAT SPRINGS, CO 80487 (NAICS 238130). OSHA activity number 343039863.

Watch Alpine Craftsman & Production, LLC — free Get an email when a new federal OSHA severe-injury report for Alpine Craftsman & Production, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1136 STEAMBOAT BLVD.
City
STEAMBOAT SPRINGS
State
CO
ZIP
80487
Mailing
PO BOX 881633, STEAMBOAT SPRINGS, CO 80488
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.451 A06

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3880.00 · Current $3300.00 Reduced
29 CFR 1926.451(a)(6): Scaffolds were not constructed in accordance with the design by a qualified person:    a) Alpine Craftsman and Production L.L.C. at 1136 Steamboat Blvd., Steamboat Springs, CO 80487:  On and before March 22, 2018 the employer did not ensure that a wooden box used to move personnel was designed by a qualified person.  The box was used to move personnel from the ground, by way of a Caterpillar TH360B rough terrain forklift, to various locations on the sides of a two-story single family home while installing windows. This condition resulted in employees being exposed to fall hazards in excess of 10 feet.
Recent events (2)
  • — I (S) $3300
  • — Z (S) $3880

1926.451 C02 V

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(c)(2)(v): The employer used forklifts to support scaffold platforms without ensuring that the entire platform was attached to the fork and that the forklift was not moved horizontally while the platform was occupied:  a)  Alpine Craftsman and Production L.L.C. at 1136 Steamboat Blvd., Steamboat Springs, CO 80487:  On and before March 22, 2018 the employer did not ensure that a platform used by a rough terrain forklift to move personnel was properly attached to the forks. A wooden box that was designed to move materials was used to move personnel from the ground, by way of a Caterpillar TH360B rough terrain forklift, to various locations on the sides of a two-story single family home while employees installed windows. This condition resulted in employees being exposed to fall hazards in excess of 10 feet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.501 B13

Serious Gravity 5 2 instances 3 exposed
Issued
Abate by
Penalty
Initial $2772.00 · Current $1250.00 Reduced
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net system, or personal fall arrest system, nor was an alternative fall protection measure provided:      (a)   Alpine Craftsman and Productions L.L.C. at 1136 Steamboat Blvd., Steamboat Springs, CO 80487:  On and before March 22, 2017, the employer did not ensure the employees were protected from injury, in that employees engaged in framing activities on the second level of a residential home had exposure to fall hazards from unprotected floor openings around the inside stairwell that lead down to the first level. This condition exposed the employees to a fall hazard of approximately 9-10 feet.      (b)   Alpine Craftsman and Productions L.L.C. at 1136 Steamboat Blvd., Steamboat Springs, CO 80487:  On and before March 22, 2017, the employer did not ensure the employees were protected from injury, in that employees engaged in framing and siding activities on the 2nd level deck on the outside of a residential home had exposure to fall hazards from unprotected sides and edges. This condition exposed the employees to a fall hazard of approximately 9-10 feet.
Recent events (2)
  • — I (S) $1250
  • — Z (S) $2772

1926.1052 C01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $2772.00 · Current $1250.00 Reduced
29 CFR 1926.1052(c)(1): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with one handrail and one stair rail system along each unprotected side or edge:       (a)   Alpine Craftsman and Productions L.L.C. at 1136 Steamboat Blvd., Steamboat Springs, CO 80487:  On and before March 22, 2017, the employer did not ensure that the interior stairway inside the building under construction being used by employees to gain access to the second level, rising approximately 10 feet, was equipped with an adequate stair rail system. Employees utilizing the stairs to reach the second level of the home were exposed to fall hazards of approximately 10 feet.         Abatement Note:  Abatement certification is required for these items (see enclosed Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $1250
  • — Z (S) $2772

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343039863.