OSHA Inspection: THE SEGERDAHL CORP. DBA SG360

Issued

2018-09-18 00:00:00

Abate by

2018-12-31 00:00:00

Penalty

Initial $11086.00 · Current $5500.00 Reduced

General-duty citation text

29 CFR 1910.147(a)(2)(ii):     29 CFR 1910.147(a)(2)(ii): Alternative measures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by the exception of 1910.147(a)(2)(ii) for routine, repetitive, and integral processes such as minor tool changes and adjustments, and other minor servicing activities.    (a) Production Department- On May 9, 2018, the employer did not ensure that alternative measures which provided sufficient effective protection, were provided to employees performing minor servicing activities- changing rollers, webbing presses and washing blankets- during normal production operations.

Issued

2018-09-18 00:00:00

Abate by

2018-10-22 00:00:00

Penalty

Initial $9239.00 · Current $4000.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:      a) Production Department- On or about May 16, 2018, the employer did not ensure that employees were adequately protected from rotating parts on equipment, such as the rollers on the face-trimmer section of Printing Press P26.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.

Issued

2018-09-18 00:00:00

Abate by

2019-12-31 00:00:00

Penalty

Initial $7391.00 · Current $6500.00 Reduced

General-duty citation text

29 CFR 1910.333(a): Safety-related work practices were not employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work was performed near or on equipment or circuits which were or could be energized:      a) Production Department- On or about May 9, 2018, the employer did not ensure that safety related work practices were utilized to prevent injury to employees performing electrical work on or near energized equipment or circuits while troubleshooting, repairing, or maintaining equipment, such as the Printing Presses.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.

Issued

2018-09-18 00:00:00

Abate by

2019-09-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.333(b)(2)(i): The employer did not maintain a written copy of the procedures outlined in paragraph (b)(2) of 29 CFR 1910.333 and did not make it available for inspection by employees and the Assistant Secretary of Labor and his or her authorized representatives:       a) Production Department- On or about May 9, 2018, the employer did not maintain a copy of the written safety related work practice procedures outlined in 29 CFR 1910.333(b)(2) for employees working on or near exposed energized parts such as troubleshooting, or repairing the Printing Presses.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.

Issued

2018-09-18 00:00:00

Abate by

2018-10-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed:  a) Production Department- On or about May 9, 2018, the employer did not ensure that electrical protective equipment such as electrically rated rubber gloves and/or appropriate flame resistant clothing was provided for employees performing troubleshooting tasks on or near exposed energized parts to protect them from electrical hazards.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.

Issued

2018-09-18 00:00:00

Abate by

2018-10-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:     a) Facility wide- On or about July 11, 2018, the employer did not ensure that the evaluation performed every three years included an evaluation of the operator's knowledge and skill to operate the power industrial vehicles safely for each type of vehicle operated, including the Reach Trucks.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2018-09-18 00:00:00

Abate by

2018-10-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.179(j)(3): Complete periodic inspections of the crane were not performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section:    a) Production Department- On or about July 11, 2018, the employer did not ensure that complete periodic inspections were performed for the 5000 lbs. integrated cranes associated with each Butler Model #738QD Presses #20, 21, 22, and 23.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).