OSHA Inspection: ALLSPEC FINISHING CORP.

Issued

2018-06-21 00:00:00

Penalty

Initial $1602.00 · Current $1202.00 Reduced

General-duty citation text

29 CFR 1910.107(b)(9): A clear space of not less than 3 feet was not kept free from storage on all sides of paint booth(s):  a) Paint Shop, on or about 3/28/18: Combustible materials including but not limited to: wood work table with miscellaneous debris on it was observed between the Powder Coat Booth and Spray Paint Booth No. 1.   b) Paint Shop, on or about 3/28/18: Combustible materials including but not limited to: plastic trash can; wood table; powder coat machine and miscellaneous wood producted was observed between the  Spray Paint Booth No. 1 and Spray Paint Booth No. 2.

Issued

2018-06-21 00:00:00

Abate by

2018-07-06 00:00:00

Penalty

Initial $1885.00 · Current $1414.00 Reduced

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employees ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:   Note:  The employer may discontinue an employees medical evaluations when the employee is no longer required to use a respirator.  a) Paint Shop, on or about 3/28/18: Employees required to wear half face air purifying respirators had not been provided with a medical evaluation.

Issued

2018-06-21 00:00:00

Abate by

2018-07-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(f)(2): Employer did not ensure that an employee using a tight fitting facepiece respirator was fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) was used, and at least annually thereafter:    a) Paint Shop, on or about 3/28/18: Employees required to wear half face air purifying respirators had not been fit tested.

Issued

2018-06-21 00:00:00

Penalty

Initial $2136.00 · Current $1602.00 Reduced

General-duty citation text

29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  a) Washing Machine Area, on or about 3/28/18: Employees using compressed air at the for cleaning purposes was measured at approximately 87 p.s.i.   b) Aluminum Sand Blaster, on or about 3/28/18: Employees using compressed air for cleaning purposes was measured at approximately 72 p.s.i.