OSHA Inspection: JAMES AUTO GROUP LLC

Issued

2018-04-26 00:00:00

Abate by

2018-05-08 00:00:00

Penalty

Initial $5691.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.59: 29 CFR 1926.59:  An employer engaged in construction activities did not comply with the requirements set forth in Part 1910, Section 1200, Hazard Communication:  a)  At the jobsite, on or about 3/29/18: Workers were using chemicals without SDS's available and without training on the hazards associated with the products.

Issued

2018-04-26 00:00:00

Abate by

2018-05-08 00:00:00

Penalty

Initial $5691.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section.  a)  At the jobsite, on or about 3/29/18: Workers were using a handheld grinder to cut and modify tile being installed, where that grinder did not have a guard.

Issued

2018-04-26 00:00:00

Abate by

2018-05-02 00:00:00

Penalty

Initial $9959.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph:   a)  At the jobsite, on or about 3/29/18: Workers were regularly accessing the electrical room where service panels were not guarded against accidental contact.

Issued

2018-04-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites:  a)  At the jobsite, on or about 3/29/18: Workers were using power tools and appliances plugged into outlets that were not GFI protected.

Issued

2018-04-26 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.404(f)(5)(i): For a grounded system, a grounding electrode conductor was not used to connect both the equipment grounding conductor and the grounded circuit conductor to the grounding electrode:  a)  At the jobsite, on or about 3/29/18: Workers were using a hand mixer that was connected to a non GFI protected outlet and where that mixer was missing the ground prong.

Issued

2018-04-26 00:00:00

Abate by

2018-05-02 00:00:00

Penalty

Initial $9959.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person:  a)  At the jobsite, on or about 3/29/18: Workers were using a scaffold that was designed and constructed under the direction of the Project Manager where that scaffold had multiple hazardous flaws.