OSHA Inspection: DIRECT DIGITAL CONTROL SYSTEMS, LLC.

Issued

2018-06-19 00:00:00

Penalty

Initial $1663.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.151(d)(1): Indoor storage obstructed or adversely affected the means of exit:       a) 80 East North Street, entire worksite, on or about 4-9-18:  Employees were performing electrical work while renovating a multi-unit housing complex where demolition debris, materials, tools, and equipment  were stored in the path of travel to fire exits/doors.

Issued

2018-06-19 00:00:00

Penalty

Initial $3880.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.403(i)(2): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures:         a) 80 East North Street, third floor, apartment 310, on or about 4-9-18:  Employees were working near an energized circuit breaker panel that did not have a cover on it, exposing the employees to energized parts inside the panel.

Issued

2018-06-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means:    a) 80 East North Street, third floor, apartment 310, on or about 4-9-18:  Employees were working in the immediate proximity to an energized circuit breaker panel that did not have a cover on it, exposing the employees to energized parts inside the panel.

Issued

2018-06-19 00:00:00

Abate by

2018-06-27 00:00:00

Penalty

Initial $2772.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.417(b): Equipment or circuits that were de-energized did not have tags attached at all points where such equipment or circuits could be energized:       a) 80 East North Street, third floor, apartment 310, on or about 4-9-18:  Two employees were installing a new circuit breaker panel without warning tags in place at the disconnect switch, which is located in a separate room, as required, allowing inadvertent re-energization of the panel.