OSHA Inspection: DUTCH'S MASONRY

Issued

2018-06-13 00:00:00

Abate by

2018-07-10 00:00:00

Penalty

Initial $4398.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.200(g)(2): Traffic control signs or devices used for protection of construction workers did not conform to Part VI of the Manual of Uniform Traffic Control Devices (AMUTCD"), 1988 Edition, Revision 3, September 3, 1993, FHWA-SA-94-027 or Part VI of the Manual on Uniform Traffic Control Devices, Millenium Edition, December 2000, FHWA:  a) Dutch's Masonry, at 1299 N. Knox Ct., Denver, CO 80204:  On and before April 16, 2018, the exposing employer did not ensure that traffic control signs or devices used for protection of construction workers conformed to Part VI of the Manual of Uniform Traffic Control Devices (AMUTCD"), 1988 Edition, Revision 3, September 3, 1993, FHWA-SA-94-027 or Part VI of the Manual on Uniform Traffic Control Devices, Millenium Edition, December 2000, FHWA.  The employer did not provide adequate advanced warning signs to protect employees who were flagging and performing work on the street.  This condition exposed employees to the hazard of getting struck by oncoming traffic.

Issued

2018-06-13 00:00:00

Abate by

2018-07-10 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.202: Barricades for protection of employees did not conform to the portions of the American National Standards Institute D6.1-1971, Manual on Uniform Traffic Control Devices for Streets and Highways, relating to barricades:  a) Dutch's Masonry, at 1299 N. Knox Ct., Denver, CO 80204: On and before April 16, 2018, the exposing employer did not ensure that barricades for protection of employees did conformed to the portions of the American National Standards Institute D6.1-1971, Manual on Uniform Traffic Control Devices for Streets and Highways, relating to barricades.  The employer did not to provide adequate barricades to protect employees who were flagging and working in the street.  This condition exposed employees to the hazards of getting struck by oncoming traffic.

Issued

2018-06-13 00:00:00

Abate by

2018-07-10 00:00:00

Penalty

Initial $3298.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.602(c)(1)(ii): Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval:  a) Dutch's Masonry, at 1299 N. Knox Ct., Denver, CO 80204:  On and before April 16, 2018, the exposing employer did not ensure that modifications or additions which affect the capacity or safe operation of the equipment were made with the manufacturer's written approval.  The employer allowed the use of a rough-terrain forklift, Genie Model GTH 844, to lift a bundle of rebar with nylon slings attached to one tine.  Lifting of a load in this manner affected the center of gravity, carrying capacity, and the security of the load.  This condition resulted in employee exposure to being struck-by falling and swinging loads.