EAU CLAIRE, WI —
OSHA Inspection: PRESTIGE AUTO CORPORATION
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of PRESTIGE AUTO CORPORATION in 3525 HWY 93, EAU CLAIRE, WI 54701 (NAICS 811111). OSHA activity number 343128633.
Where did this inspection happen?
- Establishment
- PRESTIGE AUTO CORPORATION
- Site address
- 3525 HWY 93
- City
- EAU CLAIRE
- State
- WI
- ZIP
- 54701
- Mailing
- 3525 HWY 93, EAU CLAIRE, WI 54701
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- Employees
- 70
- Ownership type
- A
Citations
11 citations on file for this inspection.
1910.22 D01
- Issued
- Abate by
- Penalty
- Initial $6467.00 · Current $2480.00 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces were inspected, regularly and as necessary, and maintained in a safe condition: (a) Throughout the service area; The walking surface was not maintained in safe condition, in that several holes were present in damaged floor drain cover grates.
Recent events (2)
- — I (S) $2480
- — Z (S) $6467
1910.22 D02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.22(d)(2): The employer did not ensure hazardous conditions on walking-working surfaces were corrected or repaired before an employee used the walking-working surface again. When the correction or repair cannot be made immediately, the hazard was not guarded to prevent employees from using the walking-working surface until the hazard is corrected or repaired: (a) Throughout the service area; Holes present in damaged floor drain cover grates were not repaired prior to allowing employees to walk on them and/or the floor holes were not guarded to prevent employees from walking on them until repairs were completed.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.106 E09 III
- Issued
- Abate by
- Penalty
- Initial $6467.00 · Current $2480.00 Reduced
General-duty citation text
29 CFR 1910.106(e)(9)(iii): Combustible waste material and residues in a building or unit operating area were not kept to a minimum, stored in covered metal receptacles and disposed of daily: (a) Throughout the service area; Combustible waste was not kept to a minimum. (b) Throughout the service area; Combustible waste receptacles were not emptied daily.
Recent events (2)
- — I (S) $2480
- — Z (S) $6467
1910.151 C
- Issued
- Abate by
- Penalty
- Initial $5174.00 · Current $2480.00 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: (a) Service and auto detail areas; A quick drench shower or eye flushing station was not provided and/or accessible near the parts washer or auto detailing areas.
Recent events (2)
- — I (S) $2480
- — Z (S) $5174
1910.215 A04
- Issued
- Abate by
- Penalty
- Initial $5174.00 · Current $2480.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) Service area; The work rest on a pedestal grinder was not adjusted to within one-eighth of an inch of the stone wheel.
Recent events (2)
- — I (S) $2480
- — Z (S) $5174
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Service area; The gap between the guard and stone grinding wheel on a bench grinder was greater than one-fourth of an inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Abate by
- Penalty
- Initial $7760.00 · Current $2480.00 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Throughout the establishment; A written hazard communication program was not developed and maintained.
Recent events (2)
- — I (S) $2480
- — Z (S) $7760
1910.1200 F06
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(f)(6): 29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information specified under paragraphs (f)(6)(i) through (ii) of this section: (a) Service and auto washing/detailing areas; The product identity, hazard warning words, and pictograms were not labeled and/or marked on each chemical container in the service and washing/detailing areas.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 G08
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not ensure that Safety Data Sheets were readily accessible during each work shift to employees when they were in their work area(s): (a) Throughout the facility; Safety Data Sheets were not maintained and/or available for chemicals used in the facility.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H02 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(h)(2)(i): The employer did not provide information to the employees on the requirements of the Hazard Communication Standard 29 CFR 1910.1200: (a) Throughout the establishment; Employees did not receive hazard communication training to inform them of the required information set forth by 29 CFR 1910.1200(h).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.36 G02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points. (a) Service area; The exitway was less than 28 inches wide near the alignment rack:
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 811111)
LONGVIEW, WA—2026-07-09
WA317992006 - LONGVIEW AUTO REPAIR LLC
HOUGHTON LAKE, MI—2026-07-08
WILSON'S AUTOMOTIVE
KELSO, WA—2026-07-08
WA317991989 - THOMAS TRANSMISSIONS LLC
BURTON, MI—2026-07-07
AMERICA'S MOST WANTED 4X4
FISHERS, IN—2026-07-07
PEP BOYS AUTO SERVICE & TIRES
More inspections in WI
MUSCODA, WI—2026-07-10
SCOT INDUSTRIES, INC
FRANKLIN, WI—2026-07-10
EDGE BROADBAND SOLUTIONS LLC
APPLETON, WI—2026-07-10
LAWRENCE UNIVERSITY OF WISCONSIN
KIMBERLY, WI—2026-07-10
ENRIQUE RESENDIC
SLINGER, WI—2026-07-10
DYLAN MATTHEW SHELLEY LLC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343128633.