Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ENGINEERED STEEL PRODUCTS, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ENGINEERED STEEL PRODUCTS, LLC in 30 HAT TRICK LANE, WRIGHT CITY, MO 63390 (NAICS 321214). OSHA activity number 343167367.

Watch Engineered Steel Products, LLC — free Get an email when a new federal OSHA severe-injury report for Engineered Steel Products, LLC is published. One employer, no account, unsubscribe in one click.
Site address
30 HAT TRICK LANE
City
WRIGHT CITY
State
MO
ZIP
63390
Mailing
30 HAT TRICK LANE, WRIGHT CITY, MO 63390
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321214
Employees
8
Ownership type
A

3 citations on file for this inspection.

1910.304 G05

Serious Gravity 5 3 instances 3 exposed
Issued
Abate by
Penalty
Initial $2772.00 · Current $1940.00 Reduced
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective  JOB SITE: 30 Hat Trick Lane, Wright City, MO  63390, on or about 5/17/2018, the employees were observed operating electrical power hand tools, actively assembling metal trusses in the production area of the facility.  The electrical power hand tools were attached to extension cords with missing ground prongs.  The employees were exposed to potential electrical hazards.
Recent events (2)
  • — I (S) $1940.4
  • — Z (S) $2772

1910.305 G02 III

Serious Gravity 5 2 instances 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  JOB SITE: 30 Hat Trick Lane, Wright City, MO  63390, on or about 5/17/2018, in the Production area, flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws.  The workers were exposed to electrical hazards.    The following extension cords were damaged:    1)      Inside of the Production area, an extension cord was used to power the Triton Band Saw.  2)      Inside of the Production area, located next to the employees break area, The extension cord connected to the Global 30" Pedestal Fan.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.334 A02 I

Serious Gravity 5 3 instances 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):  JOB SITE: 30 Hat Trick Lane, Wright City, MO 63390, on or about 5/17//2018, the employer did not ensure connected equipment and flexible cord sets (extension cords) were visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View ENGINEERED STEEL PRODUCTS, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343167367.