Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: POTESTIO BROTHERS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of POTESTIO BROTHERS, INC. in 7380 SPACE VILLAGE AVE, COLORADO SPRINGS, CO 80929 (NAICS 423820). OSHA activity number 343294583.

Watch Potestio Brothers, INC. — free Get an email when a new federal OSHA severe-injury report for Potestio Brothers, INC. is published. One employer, no account, unsubscribe in one click.
Site address
7380 SPACE VILLAGE AVE
City
COLORADO SPRINGS
State
CO
ZIP
80929
Mailing
7380 SPACE VILLAGE AVE, COLORADO SPRINGS, CO 80929
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423820
Employees
17
Ownership type
A

7 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $7760.00 · Current $4656.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards which were causing or likely to  cause death or serious physical harm to employees in that employees were exposed to struck-by hazards associated with delivery of compressed air through PVC pipe:    a)  On or about June 30, 2018, and at times prior, employees were exposed to struck-by hazards when a portion of schedule 80 PVC piping burst while delivering compressed air at 75 to 120 psi to the shop area.      Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $4656
  • — Z (S) $7760

1910.215 B09

Serious Gravity 1 1 instance 5 exposed
Issued
Penalty
Initial $3298.00 · Current $1900.00 Reduced
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:    a) On or about July 10, 2018, and at times prior, the employer exposed employees in the shop area to struck-by hazards due to the DeWalt Heavy Duty 8" bench grinder tongue guard exceeding one fourth inch.    Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $1900
  • — Z (S) $3298

1910.253 B02 II

Serious Gravity 1 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $3880.00 · Current $1444.00 Reduced
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders were not located where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons:    a)  On or about July 10, 2018, and at times prior, employees were exposed to struck by hazards in that the oxygen, acetylene and nitrogen cylinders, located in the shop area, were not secured in order to prevent tipping or damage.     Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $1444
  • — Z (S) $3880

1910.253 B04 III

Serious Gravity 1 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour:  a)  On or about July 10, 2018, and at times prior, employees were exposed to fire and explosion hazards in that the employer did not store the oxygen cylinder 20 feet away from the acetylene cylinder.  Abatement Note:  Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 G01

Other-than-serious 1 instance 17 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  a)  On or about July 10, 2018, and at times prior, the employer did not maintain a clear distance of three feet in front of two circuit breaker panels, located in the main shop and in the storage building, in order to provide access for emergency maintenance.  Abatement Note: Abatement certification is required for this item.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 F06

Other-than-serious 2 instances 10 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information specified under paragraphs (f)(6)(i) through (ii) of this section:  a)  On or about July 10, 2018, and at times prior, employees were exposed to hazardous chemicals in that the following containers, located in the shop area, were not labeled.        1) Spray bottle containing engine degreaser.        2) Water bottle containing an unknown substance, possibly coolant.        Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H03 IV

Other-than-serious 1 instance 17 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:    a)  On or about July 10, 2018, and at times prior, the employer did not train employees on the new label elements, signal words and safety data sheets format that was required to be completed by December 1, 2013.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343294583.