OSHA Inspection: PROFESSIONAL CABINET SOLUTIONS CORPORATION

Issued

2018-10-16 00:00:00

Abate by

2018-11-09 00:00:00

Penalty

Initial $9239.00 · Current $5500.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(ii): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    (a) On or about July 13, 2018, in the mill production area; specific procedures were not utilized for the control of hazardous energy for the employer's Stream Edge-bander 290 (serial no. 73406);    (b) On or about July 13, 2018 and times prior thereto, in the mill production area, specific procedures were not utilized for the employer's Homag edge banding machine (serial no. 0-200-09-1613).

Issued

2018-10-16 00:00:00

Abate by

2018-11-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  a) On or about July 13, 2018, in the mill production area; lockout or tagout devices were not affixed to each energy isolating device by authorized employees for the employer's Stream Edge-bander 290 (serial no. 73406);  (b) On or about July 13, 2018, in the mill production area; lockout or tagout devices were not affixed to each energy isolating device by authorized employees for the employer's Homag edge banding machine (serial no. 0-200-09-1613).

Issued

2018-10-16 00:00:00

Abate by

2018-11-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(d)(6): Prior to starting work on machines or equipment that had been locked out or tagged out, the authorized employee did not verify that isolation and deenergization of the machine or equipment had been accomplished:  (a) On or about July 13, 2018, in the mill production area; no verification was performed that isolation and deenergization of the equipments hazardous energy had been completed for the employer's Stream Edge-bander 290 (serial no. 73406);  (b) On or about July 13, 2018, in the mill production area; no verification was performed that isolation and deenergization of the equipments hazardous energy had been completed for the employer's Homag edge banding machine (serial no. 0-200-09-1613).

Issued

2018-10-16 00:00:00

Abate by

2018-11-09 00:00:00

Penalty

Initial $11086.00 · Current $6650.00 Reduced

General-duty citation text

29 CFR 1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation of guillotine tape cutting blades on various board edge processing machinery:    (a) On or about July 6, 2018 and times prior thereto, employees were exposed to amputation hazards while working on the Biesse Edge Stream B1-290 (serial no. 73406);    (b) On or about July 6, 2018 and times prior thereto, employees were exposed to amputation hazards while working on the Biesse Edge Stream B1 7.0 (serial no. 1000004965);    (c) On or about July 6, 2018 and times prior thereto, employees were to amputation hazards while working on the Biesse Edge Stream B1 7.0 (serial no. 1000004968);    (d) On or about July 6, 2018 and times prior thereto, employees were exposed to amputation hazards while working on the Fletcher edge bander (serial no. 0645-7).