Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

GULFPORT, MS —

OSHA Inspection: GULF COAST LAUNDRY

Complaint inspection · Safety discipline

At a glance

On , OSHA opened a complaint safety inspection of GULF COAST LAUNDRY in 12071 SEAWAY RD, GULFPORT, MS 39503 (NAICS 812320). OSHA activity number 343323689.

Watch Gulf Coast Laundry — free Get an email when a new federal OSHA severe-injury report for Gulf Coast Laundry is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
GULF COAST LAUNDRY
Site address
12071 SEAWAY RD
City
GULFPORT
State
MS
ZIP
39503
Mailing
12071 SEAWAY RD, GULFPORT, MS 39503

What kind of inspection was it?

Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
812320
Employees
120
Ownership type
A

Citations

5 citations on file for this inspection.

1910.215 A04

Serious Gravity 1 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $4240.00 · Current $2544.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:  (a) Maintenance department - On or before July 19, 2018 employees were using grinding machine that has the top and bottom guards missing.
Recent events (2)
  • — I (S) $2544
  • — Z (S) $4240

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): Guards for abrasive wheel machinery where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel. The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch.   (a) Maintenance department - On or about July 19, 2018 employees were using the grinding machine that has the tong guard missing.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 F03

Serious Gravity 10 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $11641.00 · Current $6985.00 Reduced

General-duty citation text

29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:  (a) Soil department - On or about July 19, 2018 employees working on the soil line were exposed to the chain and sprockets at the end of the belt when they had to empty the trash bins.
Recent events (2)
  • — I (S) $6984.6
  • — Z (S) $11641

1910.264 D02 I A

Serious Gravity 1 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4240.00 · Current $2544.00 Reduced

General-duty citation text

29 CFR 1910.264(d)(2)(i)(a): Operating Rules, Mechanical, Safety Guards.  No safeguard, safety appliance, or device attached to, or forming an integral part of any machinery shall be removed or made ineffective except for the purpose of making immediate repairs or adjustments. Any such safeguard, safety appliance, or device removed or made ineffective during the repair or adjustment of such machinery shall be replaced immediately upon the completion of such repairs or adjustments.  (a) Soil department - On or about July 19, 2018 employees working from conveyor belt sorting soiled linen where the E-Stop pull cord was disconnected by maintenance for over 3 weeks without being repaired.
Recent events (2)
  • — I (S) $2544
  • — Z (S) $4240

1910.178 L01 I

Other-than-serious 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  (a) Throughout the facilities - On or about July 19, 2018 employees were operating the forklift to load and unload trucks without proper training.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

More inspections in this industry (NAICS 812320)

More inspections in MS

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343323689.