OSHA Inspection: CENTRAL FLORIDA LUMBER AND SUPPLY CO, INC.

Issued

2018-11-16 00:00:00

Abate by

2018-11-29 00:00:00

Penalty

Initial $7114.00 · Current $7114.00

General-duty citation text

29 CFR 1910.213(b)(5): On each machine operated by electric motors, positive means were not provided for rendering such controls or devices inoperative while repairs or adjustments are being made to the machines they control:   a. At the wood working area, employees were exposed to a struck by hazard, in that, the Norfield Door machine which was hard-wired was not provided with a main disconnect which could be used to lockout the machine during maintenance, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Abate by

2018-11-29 00:00:00

Penalty

Initial $4268.00 · Current $4268.00

General-duty citation text

29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator:  a. At the wood working area, employees were exposed to a struck by hazard, in that, a Delta Milwaukee Multiplex 40-B radial arm saw did not retract in its resting position after the cutting head was released by the operator, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Penalty

Initial $4268.00 · Current $4268.00

General-duty citation text

29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. and effective chip guarding and personal protective equipment was not used.  a. At Door and Frame area station number 3, employees were expose to the hazard of using air for cleaning at 110 p.s.i. without reducing the pressure to less than 30 p.s.i. and by the use of effective chip guarding, on or about 07/26/2018.  b. At Door and Frame area station number 2, employees were expose to the hazard of using air for cleaning at 110 p.s.i. without reducing the pressure to less than 30 p.s.i. and by the use of effective chip guarding, on or about 07/26/2018.  c. Wood-Working area, employees were expose to the hazard of using air for cleaning at 110 p.s.i. without reducing the pressure to less than 30 p.s.i. and by the use of effective chip guarding, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Penalty

Initial $5691.00 · Current $5691.00

General-duty citation text

29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:  a. Frame and door  manufacturing areas, employees were exposed to ultraviolet (UV) radiation, in that, welding screens were not used to completely enclose the welding stations, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Penalty

Initial $4268.00 · Current $4268.00

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:   a. Door and Frame manufacturing areas, at the various work stations, employees were expose to an electrical hazard, in that, metal electrical boxes were not installed as designed and were used as multi-outlet extension strips providing power to the various work locations, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Penalty

Initial $4268.00 · Current $4268.00

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  a. Door and Frame manufacturing area stations, employees were exposed to an electrical hazard, in that, 120 volt extension cords and multi outlet extension strips were used to provide power to the equipment at the work station, on or about 07/26/2018.  b. Door and Frame manufacturing area stations, employees were exposed to an electrical hazard, in that, 220 volt extension cords were used to provide power to the welders at the work stations, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Abate by

2018-12-06 00:00:00

Penalty

Initial $14228.00 · Current $14228.00

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  a. At the frame side of the manufacturing area, a RKS Tool and Die, Inc. punch press was not provided with a guard exposing employees to the point of operation, on or about 07/26/2018.  Central Florida Lumber and Supply Co, Inc. dba Mills & Nebraska, Inc. was previously cited for a violation of this Occupational Safety and Health Standard 29 CFR 1910.212(a)(1) which was contained in OSHA inspection number 1012529, citation number 1, item number 1 and was affirmed as a final order on 02/24/2015 with respect to a workplace located at 2721 Regent Street, Orlando, FL 32804.

Issued

2018-11-16 00:00:00

Abate by

2018-11-29 00:00:00

Penalty

Initial $8536.00 · Current $8536.00

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:   a. At the maintenance shop, employees were exposed to a struck by hazard, in that, the 15 inch 1 HP Craftsman drill press was not secured to the floor to prevent moving or walking while in use, on or about 07/26/2018.   Central Florida Lumber and Supply Co, Inc. dba Mills & Nebraska, Inc. was previously cited for a violation of this Occupational Safety and Health Standard 29 CFR 1910.212(b) which was contained in OSHA inspection number 1012529, citation number 1, item number 2 and was affirmed as a final order on 02/24/2015 with respect to a workplace located at 2721 Regent Street, Orlando, FL 32804.

Issued

2018-11-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.28(b)(11)(ii): Each flight of stairs having at least 3 treads and at least 4 risers was not equipped with stair rail systems and handrails as required in Table D-2 of this standard:  a. At the roll up doors, three stairways with six risers, providing access to the warehouse from outside, were not provided with a stair rail system and a handrail on the right side descending, exposing employees to a fall hazard when using the stairways, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:  a. At the site, employees were exposed to smoke inhalation, in that, portable fire extinguishers were not inspected monthly as required, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective:  a. Manufacturing area Frame and Door side, employees were expose to an electrical hazard, in that, a black extension cord, a yellow extension cord and a red extension cord were used with the ground prong broken off, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Abate by

2019-01-07 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1):  The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a. On site, employees were exposed to chemical products such as, but not limited to, oxygen, acetylene, mig wire, paint and paint related products, acetone, and maintenance chemicals such as 409, WD-40 and degreasers. A written hazard communication program was not developed, maintained and implemented at the workplace, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Abate by

2019-01-07 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet:  a. On site, employees were exposed to chemical products such as, but not limited to, oxygen, acetylene, mig wire, paint and paint related products, acetone, and maintenance chemicals such as 409, WD-40 and degreasers. A list of chemicals was not developed and maintained to include all chemical products used by employees, on or about 07/26/2018.

Issued

2018-11-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information specified under paragraphs (f)(6)(i) through (ii) of this section:  a. On site, employees were exposed to chemical products such as, but not limited to, acetone, in that, a one gallon container was not provided with a label which had a product identifier with words, pictures, symbols, or a combination thereof, on or about 07/26/2018.