OSHA Inspection: SHEET METAL AND ROOFING TECHNOLOGY INC.

Issued

2018-10-16 00:00:00

Abate by

2018-10-26 00:00:00

Penalty

Initial $5174.00 · Current $3105.00 Reduced

General-duty citation text

29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:    On or about 07/31/2017, at 9101 Pine Island Road, in Sunrise, Florida, employees working on a roof had not received training in fall protection exposing them to a fall hazard.

Issued

2018-10-16 00:00:00

Penalty

Initial $5174.00 · Current $3105.00 Reduced

General-duty citation text

29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels, was not protected from falling by guardrail systems, safety net systems, or personal fall arrest systems:    On or about 07/31/2018, at 9101 Pine Island Road, in Sunrise, Florida, employees installing roof panels on a commercial building did not have fall protection exposing them to a fall hazard.

Issued

2018-10-16 00:00:00

Penalty

Initial $5174.00 · Current $3105.00 Reduced

General-duty citation text

29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    On or about 07/31/2018, at 9101 Pine Island Road, in Sunrise, Florida, employees were using an extension ladder to access a roof and the ladder did not extend at least 3-feet above the landing exposing employees to a fall hazard.