OSHA Inspection: CARLOS JOEL CONSTRUCTION

Issued

2018-09-05 00:00:00

Penalty

Initial $2772.00 · Current $2772.00

General-duty citation text

29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturers prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.  (A)  Modifications and additions were performed without manufacturers prior written approval as required. JLG Skytrak 8042 rough terrain forklift was modified with a job-made man box/debris box. The company had not received approval from the manufacturer of the forklifts for the use of the attachments.  A) 100 Market St Monroe Township, NJ 08831  Occurred on or about 08/14/18

Issued

2018-09-05 00:00:00

Penalty

Initial $3880.00 · Current $3880.00

General-duty citation text

29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms in which the entire scaffold platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied:   An employee was observed standing inside a job-made man box attached to the forks of the rough terrain forklift while the forklift was moving.  A) 100 Market St Monroe Township, NJ 08831   Occurred on or about 08/14/18

Issued

2018-09-05 00:00:00

Abate by

2018-10-23 00:00:00

Penalty

Initial $2772.00 · Current $2772.00

General-duty citation text

29 CFR 1926.451(f)(3): Scaffold and scaffold components were not inspected for visible defects by a competent person before each workshift and after any occurrence which could affect a scaffold's structural integrity:  A) 100 Market St Monroe Township, NJ 08831  The tubular welded scaffold  was erected without the supervision of a qualified competent person.  Occurred on or about 08/14/18

Issued

2018-09-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.451(e)(1): Portable ladder, hook-on ladder, attachable ladder, stair tower, stairway-type ladder, ramp, runway, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface was not used to access scaffold platform more than 2 feet above or below a point of access:  A) 100 Market St Monroe Township, NJ 08831  Employees were climbing the scaffold frame and or walking unguarded plank to access scaffold platforms.  No other means of access was provided.  Occurred on or about 08/14/18

Issued

2018-09-05 00:00:00

Abate by

2018-10-23 00:00:00

Penalty

Initial $2772.00 · Current $2772.00

General-duty citation text

29 CFR 1926.602(d): Powered industrial truck operator training.  Note: The requirements applicable to construction work under this paragraph are identical to those set forth at '1910.178(l) of this chapter.  29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  A) 100 Market St Monroe Township, NJ 08831  The employer did not ensure that the operator of the JLG Skytrak 8042 rough terrain forklift had been adequately trained.  Occurred on or about 08/14/18