OSHA Inspection: OASIS MARBLE & GRANITE INC

Issued

2018-12-26 00:00:00

Abate by

2019-01-23 00:00:00

Penalty

Initial $2217.00 · Current $1330.00 Reduced

General-duty citation text

29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:  a) Shop - A Hyster 70 sit-down forklift had a homemade lifting attachment that was not approved by the manufacturer, on or about September 5, 2018.

Issued

2018-12-26 00:00:00

Abate by

2019-01-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:  a) Shop - A Hyster 70 sit-down forklift had a homemade lifting attachment and was not marked for the configuration used to lift granite slabs, on or about

Issued

2018-12-26 00:00:00

Abate by

2019-01-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed:  a) Shop - The personal protective equipment hazard assessment was not documented, on or about September 5, 2018.

Issued

2018-12-26 00:00:00

Abate by

2019-01-23 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible:  a) Shop - The respirator information was not provided to voluntary respirator users, on or about September 5, 2018.