Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ENGELMAN BAKING CO., INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ENGELMAN BAKING CO., INC. in 6185 BROOK HOLLOW PARKWAY, NORCROSS, GA 30071 (NAICS 424490). OSHA activity number 343488706.

Watch Engelman Baking CO., INC. — free Get an email when a new federal OSHA severe-injury report for Engelman Baking CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
6185 BROOK HOLLOW PARKWAY
City
NORCROSS
State
GA
ZIP
30071
Mailing
6185 BROOK HOLLOW PARKWAY, NORCROSS, GA 30071
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
424490
Employees
98
Ownership type
A

5 citations on file for this inspection.

1910.151 C

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $9282.00 · Current $5600.00 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a)  Cleaning area - On or about September 14 2018 and at times prior to,  employees engaged in cleaning and sanitizing cooking and backing material were using corrosive chemical products including but not limited to; F-29, F-184, F-110, Evnviroguard Sanitizer, Evnviroguard drain treatment, Perafoam and Power Foam ALS with no emergency eye wash station within the perimeter in accordance with manufacturer's instruction.
Recent events (2)
  • — I (S) $5600
  • — Z (S) $9282

1910.157 C01

Serious Gravity 1 3 instances 10 exposed
Issued
Abate by
Penalty
Initial $3381.00 · Current $2600.00 Reduced
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:    On or about September 24, 2018, and at times prior to, employees to hazards associated with improperly stored fire extinguishers where the following deficiencies found included, but were not limited to:    a)    Docking station  - Access to the fire extinguisher was obstructed by empty bread racks that were placed in front of it and it was also not marked.    b)    Bread storage area - Access to the fire extinguisher was obstructed by racks filled with bread and it was also not marked.     c)   Cleaning area - Access to the fire extinguisher was obstructed by buckets, a mop and it was also not marked.
Recent events (2)
  • — I (S) $2600
  • — Z (S) $3381

1910.178 A04

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $9282.00 · Current $5600.00 Reduced
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:    a) Throughout the facility: On or about September 24, 2018, and at times prior to, employees used the Toyota sit-down type LP-gas forklift, model TO25C, SN #562412A with a personnel platform to lift employees to perform maintenance tasks.  Employees were exposed to falling from distances up to 6-feet to the concrete below. The manufacturer did not approve the use of the platform.
Recent events (2)
  • — I (S) $5600
  • — Z (S) $9282

1910.178 L06

Serious Gravity 10 3 instances 10 exposed
Issued
Abate by
Penalty
Initial $9282.00 · Current $5600.00 Reduced
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    On out about September 14,  2018 and at times prior to, the employer did not ensure that all forklift operators were retrained and recertified for safety operation of the propane and battery power forklifts used at the facility. Employees were operating the forklift when they were not recertified.
Recent events (2)
  • — I (S) $5600
  • — Z (S) $9282

1910.212 A01

Serious Gravity 10 2 instances 10 exposed
Issued
Abate by
Penalty
Initial $9282.00 · Current $5600.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by  ingoing nip points, rotating parts, moving parts:    a)  Circular conveyor - On or about September 24, 2018, and at times prior to, the employer did not ensure that all running nip points and rotating parts of the machine were guarded. The metal conveyor that moves bread to be cool from the oven was not guarded where employees perform tasks such as, but not limited to, loading bread and walking near and around the equipment. Employees were exposed to caught-in between hazards.    b) Oliver Machine Model NO. 787G , SN: 108132 -  On or about September, 24 2018, and at times prior to, the employer did not ensure that moving blades of the machine were guarded. Employees placing to be cut and picking up bread  on the machine was not guarded, exposing them to caught-in between hazards.
Recent events (2)
  • — I (S) $5600
  • — Z (S) $9282

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343488706.