OSHA Inspection: JCH FRAMING INC

Issued

2019-06-10 00:00:00

Abate by

2019-07-12 00:00:00

Penalty

Initial $425.00 · Current $425.00

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   JCH Framing Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number            Item Number                    Abatement Date  01                                01                                   02/14/2019  01                                02                                   02/14/2019  01                               03                                   02/14/2019  01                                04                                    02/14/2019  01                                05                                    03/14/2019  01                                06                                    02/14/2019    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).

Issued

2019-02-08 00:00:00

Abate by

2019-02-14 00:00:00

Penalty

Initial $3031.00 · Current $3031.00

General-duty citation text

29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:     a) On October 11, 2018, employees were exposed to eye injury while operating power tools without eye protection during carpentry work.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2019-02-08 00:00:00

Abate by

2019-02-14 00:00:00

Penalty

Initial $5304.00 · Current $5304.00

General-duty citation text

29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:      a)  On October 11, 2018, employees engaged in carpentry work were not protected from fall hazards of approximately 40 feet to the ground, while working along an unprotected edge.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2019-02-08 00:00:00

Abate by

2019-02-14 00:00:00

Penalty

Initial $5304.00 · Current $5304.00

General-duty citation text

29 CFR 1926.501(b)(3):  Each employee in a hoist area was not protected from falling 6 feet (1.8 m) or more to lower levels by guardrail systems or personal fall arrest systems:      a)  On October 11, 2018, employees were exposed to the hazard of falling approximately 40 feet to the ground while working in the hoist area.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2019-02-08 00:00:00

Abate by

2019-02-14 00:00:00

Penalty

Initial $5304.00 · Current $5304.00

General-duty citation text

29 CFR 1926.501(b)(4)(i):  Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels by personal fall arrest systems, covers or guardrail systems erected around such holes:    a)  On October 11, 2018, employees were not protected from the hazard of falling approximately 40 feet to the ground through multiple unguarded deck openings.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2019-02-08 00:00:00

Abate by

2019-03-14 00:00:00

Penalty

Initial $3789.00 · Current $3789.00

General-duty citation text

29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee who might be exposed to fall hazards:    a)  On or about October 11, 2018, employer did not provide training to each employee in order to recognize hazards associated with working at an elevation and to understand procedures to control or minimize those hazards.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2019-02-08 00:00:00

Abate by

2019-02-14 00:00:00

Penalty

Initial $3031.00 · Current $3031.00

General-duty citation text

29 CFR 1926.701(b):  All protruding reinforcing steel, onto and/or into which employees could fall or come against, was not guarded to eliminate the hazard of impalement:    a) On October 11, 2018, employees performing carpentry work were exposed to the hazard of impalement due to reinforcing steel being unprotected.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

2019-02-08 00:00:00

Penalty

Initial $4546.00 · Current $4546.00

General-duty citation text

29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:  a)  On October 11, 2018, employees were standing above the second step from the top of a stepladder in order to access and egress the floor deck.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).