Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: SIDELL AGRI-SERVICES, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of SIDELL AGRI-SERVICES, INC. in 104 CHICAGO ST, SIDELL, IL 61876 (NAICS 424510). OSHA activity number 343555777.

Watch Sidell Agri-Services, INC. — free Get an email when a new federal OSHA severe-injury report for Sidell Agri-Services, INC. is published. One employer, no account, unsubscribe in one click.
Site address
104 CHICAGO ST
City
SIDELL
State
IL
ZIP
61876
Mailing
104 CHICAGO ST, SIDELL, IL 61876
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
424510
Employees
10
Ownership type
A

6 citations on file for this inspection.

1910.132 D01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1932.00 · Current $1352.00 Reduced
29 CFR 1910.132(d)(1)(i): The employer did not select and have each affected employee use, the types of personal protective equipment that would protect the affected employee(s) from the hazards identified in the hazard assessment:    On or about October 24, 2019 employees working at the facility were exposed to struck-by hazards when working near the dump pit because the employer did not require employees to wear high visibility clothing.
Recent events (2)
  • — I (S) $1352.4
  • — Z (S) $1932

1910.272 M01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1932.00 · Current $1352.00 Reduced
29 CFR 1910.272(m)(1)(i): Preventive maintenance procedures in the grain handling facility were not implemented to provide regularly scheduled inspections of the mechanical and safety control equipment associated with dryers, grain stream processing equipment, dust collection equipment including filter collectors, and bucket elevators:    On or about October 24, 2019 employees working at the facility were exposed to fire and explosion hazards because the employer did not develop preventative maintenance procedures that included regular inspections of the grain processing equipment.
Recent events (2)
  • — I (S) $1352.4
  • — Z (S) $1932

1910.305 B02 I

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1449.00 · Current $1014.00 Reduced
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:    On or about October 24, 2018 employees were exposed to accidental contact and electrical shock because live electrical conductors in a junction box were guarded with an approved cover.
Recent events (2)
  • — I (S) $1014.3
  • — Z (S) $1449

1910.305 G01 IV A

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $1449.00 · Current $1014.00 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    On or about October 24, 2018 employees were exposed to electrical and fire hazards because the flexible cords used to provide power to the elevator were used as a substitute for fixed wiring.
Recent events (2)
  • — I (S) $1014.3
  • — Z (S) $1449

1910.305 G01 IV B

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables were used where run through holes in walls, ceilings, or floors:    On or about October 24, 2018 employees were exposed to electrical and fire hazards because the electrical cords used to provide power to the elevator were run through walls and expanded metal flooring.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 G01 IV D

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.305(g)(1)(iv)(D): Flexible cords and cables were attached to building surfaces:    On or about October 24, 2018 employees were exposed to electrical and fire hazards because the flexible cords used to provide power to the elevator were attached to building surfaces and railings with zip-ties.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343555777.