OSHA Inspection: JAL ENTERPRISES, INC.

Issued

2019-01-10 00:00:00

Abate by

2019-02-06 00:00:00

Penalty

Initial $2513.00 · Current $1759.00 Reduced

General-duty citation text

29 CFR 1910.101(b): 29 CFR 1910.101(b):  Section 3.4.4, Compressed Gas Association Pamphlet P11965, as adopted by 29 CFR 1910.101(b): Compressed gas cylinder(s) in use were not properly supported to prevent them from being knocked over:  a)    JAL Enterprises dba The Source, Shop: On or about 10/12/2018, an argon cylinder used to tungsten inert gas weld stainless steel plate to a dishwasher machine was not properly supported to prevent it from being knocked over.   Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

2019-01-10 00:00:00

Abate by

2019-02-06 00:00:00

Penalty

Initial $2513.00 · Current $1759.00 Reduced

General-duty citation text

29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested:  a)    JAL Enterprises dba The Source, Weld Shop: On or about 10/12/2018, an employee required to wear a half face tight-fitting respirator during stainless steel welding was not provided with an annual fit test as a result was possible overexposed to chromium VI.   Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

2019-01-10 00:00:00

Abate by

2019-02-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary:  a)     JAL Enterprises dba The Source, Shop: On or about 10/26/2018, employees required to wear a tight-fitting respirator during welding operations were not provide with annual respiratory protection training.     Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

2019-01-10 00:00:00

Abate by

2019-02-14 00:00:00

Penalty

Initial $2513.00 · Current $1759.00 Reduced

General-duty citation text

29 CFR 1915.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI  a)    JAL Enterprises dba The Source, Shop: On or about 10/12/2018, an employee welded with 316L stainless steel that according to the safety datasheet contained approximately 16-19 percent chromium. The employee's 8-hour time-weight average exposure was not determined therefore employees were potentially overexposed to toxic fumes.  Note: The employer is to make this determination in accordance with either paragraph (d)(2), the scheduled monitoring option, or paragraph (d)(3), the performance-oriented option.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

2019-01-10 00:00:00

Abate by

2019-02-14 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(3)(iv): Employees had not been provided with GHS 2012 training including an explanation of the labels received on shipped containers and the workplace labeling system to be used by their employer; the safety data sheet, including the order of information, and how employees can obtain and use the appropriate hazard information:  a)    JAL Enterprises dba The Source: On or about 10/26/2018, employees required to use Kleen Brite and other chemicals were not provided with the new GHS training.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

2019-01-10 00:00:00

Abate by

2019-02-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1915.132(d): Worn or frayed electric cables shall not be used.  a)    JAL Enterprises dba The Source, Weld Shop: On or about 10/26/2018, a Milwaukee 4.5 inch electrical sander-grinder, serial #6148 had a frayed cord and black tape was applied over the outer jacket to cover the damage.   Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.