OREFIELD, PA —
OSHA Inspection: JFF
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JFF in 3150 COFFEEFLOW RD., OREFIELD, PA 18069 (NAICS 311615). OSHA activity number 343590972.
Where did this inspection happen?
- Establishment
- JFF
- Site address
- 3150 COFFEEFLOW RD.
- City
- OREFIELD
- State
- PA
- ZIP
- 18069
- Mailing
- 3150 COFFEEFLOW RD., OREFIELD, PA 18069
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311615
- Employees
- 130
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.215 A02 I
- Issued
- Abate by
- Penalty
- Initial $5796.00 · Current $4500.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(2)(i): Safety guards on all operations where the work provides a suitable measure of protection to the operator, were not so constructed that the spindle end, nut, and outer flange were not exposed: a) The Production Work Area, Maintenance Shop: On or about November 8, 2018, an employee used a Simmons rotary knife sharpener, which was without any measure of suitable protection for the spindle end, nut, and outer flange.
Recent events (2)
- — I (S) $4500
- — Z (S) $5796
1910.219 D01
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) The Production Work Area, Maintenance Shop: On or about November 8, 2018, an employee used a Simmons rotary knife sharpener which had an unguarded pulley which created a nip point hazard between the belt and pulley.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 E03 I
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o) a) The Production Work Area, Maintenance Shop: On or about November 8, 2018, an employee used a Simmons rotary knife sharpener which had an unguarded inclined belt that created a nip point hazard between the belt and pulley.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Abate by
- Penalty
- Initial $4347.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) The Production Work Area, Maintenance Shop: On or about November 8, 2018, employees used a relocatable power tap in series with an extension cord to provide power to blade sharpening equipment, which is not in accordance with the relocatable power tap's listing and labeling.
Recent events (2)
- — I (S) $0
- — Z (S) $4347
More inspections in this industry (NAICS 311615)
LEWISTON WOODVILLE, NC—2026-07-10
161527 - PERDUE FARMS INC
TIMBERVILLE, VA—2026-07-08
PILGRIMS PRIDE CORPORATION
WYOMING, MI—2026-07-06
MICHIGAN TURKEY PRODUCERS
COLD SPRING, MN—2026-06-25
111475 - PILGRIMS PRIDE CORPORATION
FRESNO, CA—2026-06-22
FOSTER POULTRY FARMS, LLC
More inspections in PA
MILTON, PA—2026-07-10
HOMETOWN FOODS CHEF BOYARDEE CO.
SUNBURY, PA—2026-07-10
DEMPSEY UNIFORM & LINEN SUPPLY, INC
LANDISVILLE, PA—2026-07-10
FAIRVIEW DEMOLITION LLC
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
WILLIAMSPORT, PA—2026-07-10
INTERNATIONAL PAINT PROS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343590972.