OSHA Inspection: DON MIGUEL MEXICAN FOODS, INC.

Issued

2019-02-07 00:00:00

Abate by

2019-03-06 00:00:00

Penalty

Initial $13260.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.       a)     This violation was discovered on November 20, 2018, where employees machine operators who cleared jams and performed service on equipment and/or machinery were not provided procedures for the control of potentially hazardous energy.

Issued

2019-02-07 00:00:00

Abate by

2019-03-06 00:00:00

Penalty

Initial $11366.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(5)(ii)(D): Identifiable. Lockout devices and tagout devices shall indicate the identity of the employee applying the device(s):                                                                                                                                  a)     This violation was discovered on or about November 20, 2018, where maintenance employees performing work on machinery and/or equipment used locks and tags that did not indicate the identity of the employee, who applied the devices.

Issued

2019-02-07 00:00:00

Abate by

2019-03-06 00:00:00

Penalty

Initial $5683.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed:   a)     This violation was discovered on or about November 20, 2018, where the employer did not certify the periodic inspection of the energy control procedures at least annually to ensure that the procedure and requirements of this standard are being followed.

Issued

2019-02-07 00:00:00

Abate by

2019-03-06 00:00:00

Penalty

Initial $13260.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees:      a)     This violation occurred on or about November 14, 2018; where at least one employee servicing a Repak Reiser Packaging Machine (m/n RE20, s/n 2060318) was injured.

Issued

2019-02-07 00:00:00

Abate by

2019-03-06 00:00:00

Penalty

Initial $13260.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(2): Guards shall be affixed to the machine where possible and secured elsewhere if for any reason attachment to the machine is not possible. The guard shall be such that it does not offer an accident hazard in itself:   a)     This violation was discovered on November 20, 2018, where at least one (1) employee was exposed to struck-by hazards while clearing a jam on the Repak Reiser Packaging Machine (m/n RE20, s/n 2060318).