Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: SERGIO B RODRIGUEZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SERGIO B RODRIGUEZ in 6241 SLIDE ROAD, LUBBOCK, TX 79414 (NAICS 238140). OSHA activity number 343652475.

Watch Sergio B Rodriguez — free Get an email when a new federal OSHA severe-injury report for Sergio B Rodriguez is published. One employer, no account, unsubscribe in one click.
Establishment
SERGIO B RODRIGUEZ
Site address
6241 SLIDE ROAD
City
LUBBOCK
State
TX
ZIP
79414
Mailing
4805 NORTH I-27, LUBBOCK, TX 79403
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
7
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3326.00 · Current $3326.00
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  On or about October 17, 2018 on the west side of the jobsite, the employer allowed employees to work under loads without the use of hard hats while using scaffold to performing stucco work on the exterior of the building.
Recent events (1)
  • — Z (S) $3326

1926.451 A06

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3880.00 · Current $3880.00
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person:  On or about October 17, 2018 on the west side of the jobsite, the employer allowed employees to utilize a scaffold that had not been designed by a qualified person while performing stucco work on the exterior of the building.
Recent events (1)
  • — Z (S) $3880

1926.451 G04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms before being released for use by employees other than erection/dismantling crews:  On or about October 17, 2018 on the west side of the jobsite, the employer allowed employees to utilize a scaffold that was 4 sections tall and had missing guardrails along multiple sides and ends.  Employees were exposed to fall hazards in excess of ten feet.
Recent events (1)
  • — Z (S) $0

1926.451 B01 II

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3880.00 · Current $3880.00
29 CFR 1926.451(b)(1)(ii): The platform was not planked or decked as fully as possible and the remaining open space between the platform and the uprights exceeded 9.5 inches (24.1 cm):  On or about October 17, 2018 on the west side of the jobsite, the employer allowed employees to utilize a scaffold that was not planked as fully as possible while performing stucco work on the exterior of the building.
Recent events (1)
  • — Z (S) $3880

1926.451 E09 IV

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(e)(9)(iv): Cross braces on tubular welded frame scaffolds were used as a means of access or egress.  On or about October 17, 2018 on the west side of the jobsite, the employer allowed employees to utilize a scaffold that was not equipped with a ladder while performing stucco work on the exterior of the building.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343652475.