Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: TRANS ASH MANAGEMENT, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of TRANS ASH MANAGEMENT, INC. in 617 SHEPHERD DRIVE, CINCINNATI, OH 45215 (NAICS 811310). OSHA activity number 343691671.

Watch Trans ASH Management, INC. — free Get an email when a new federal OSHA severe-injury report for Trans ASH Management, INC. is published. One employer, no account, unsubscribe in one click.
Site address
617 SHEPHERD DRIVE
City
CINCINNATI
State
OH
ZIP
45215
Mailing
617 SHEPHERD DRIVE, CINCINNATI, OH 45215
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811310
Employees
30
Ownership type
A

8 citations on file for this inspection.

1910.107 C02

Serious Gravity 10 1 instance 3 exposed
Issued
Penalty
Initial $13260.00 · Current $6630.00 Reduced

Hazardous substances 00400440104013802460

29 CFR 1910.107(c)(2): Open flame or spark producing equipment was located in the spraying area or within 20 feet thereof, and was not separated by a partition.    (a)  The white Ingersoll Rand air compressor in the paint area sometimes emitted sparks from the motor when it was set on auto and it restarted itself while employees were spray painting.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $6630
  • — Z (S) $13260

1910.133 A03

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $6440.00 · Current $0.00 Reduced

Hazardous substances 9135

29 CFR 1910.133(a)(3): The employer did not ensure that each affected employee who wore prescription lenses while engaged in operations that involved eye hazards wore eye protection that incorporated the prescription in its design, or wore eye protection that could be worn over the prescription lenses without disturbing the proper position of the prescription lenses or the protective lenses.  (a)  On January 14, 2019, an welder was observed wearing regular prescription glasses with safety side shields instead of safety glasses that met the requirements of ANSI Z-87.1 Occupational and Educational Personal Eye and Face Protection Devices.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6440

1910.134 C01 VI

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $8051.00 · Current $4476.00 Reduced

Hazardous substances 00400440068907311040

29 CFR 1910.134(c)(1)(vi): The written program did not contain procedures to ensure adequate air quality, quantity, and flow of breathing air for atmosphere-supplying respirators:    (a)  The employer's written respiratory protection program did not address breathing air quality and use for the compressed air supplied to the Clemco Apollo 600 supplied air respirator hood worn by employees for blasting metal parts to prepare them for welding and painting in the shop.        In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $4475.5
  • — Z (S) $8051

1910.134 I01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 00400440068907311040

29 CFR 1910.134(i)(1)(ii): Breathing air did not meet requirements for Grade D breathing air as described in the ANSI/Compressed Gas Association Commodity Specification G-7.1-1989:    (a)  The employer did not ensure that  breathing air met Grade D requirements for the compressed air supplied to the Clemco Apollo 600 supplied air respirator hood worn by employees for blasting metal parts to prepare them for welding and painting in the shop.        In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F02

Other-than-serious 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $6440.00 · Current $0.00 Reduced

Hazardous substances 00400440068907311040

29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested:    (a)  On or about January 7, 2019, the employer had not provided fit testing since October 9, 2017, for employees who wore 3M 6200 half mask tight fitting respirators in the paint department, while spraying paint that contained hazardous chemicals such as but not limited to acetone, toluene, xylene, and methyl ethyl ketone, all of which can cause irritation and narcosis.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (O) $0
  • — Z (S) $6440

1904.30 A

Deleted Other-than-serious 1 instance 400 exposed
Issued
Abate by
Penalty
Initial $1611.00 · Current $0.00 Reduced
29 CFR 1904.30(a): 29 CFR 1904.30(a)  The employer did not maintain a separate OSHA 300 Log for each establishment that was expected to be in operation for one year or longer.  (a)  The employer did not maintain separate OSHA 300 Logs for 23 sites located in eight states that were in existence for more than one year.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
  • — I (O) $0
  • — Z (O) $1611

1910.132 D02

Other-than-serious 1 instance 400 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

Hazardous substances 00400440068907311040

29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:    (a)  The employer did not certify in writing that a hazard assessment of the workplace had been completed.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 K06

Deleted Other-than-serious 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  (a)  Employees working in the shop who wore 3M 8210V dust mask respirators on a voluntary basis were not provided with the information contained in Appendix D of the standard.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View TRANS ASH MANAGEMENT, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343691671.