OSHA Inspection: JOHN A MARSHALL COMPANY

Issued

2019-03-19 00:00:00

Abate by

2019-03-29 00:00:00

Penalty

Initial $5304.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer did not ensure that each operator had successfully completed the training required by paragraph (l):  At the location of 816 Funston in Wichita, KS, employees were exposed to struck-by hazards  Employees engaged in moving boxed furniture with the use of a Toyota Forklift (Model 7FGCSU20, SN 62445), and other employees working in the area were exposed in that comprehensive forklift training had not been provided to all operators.

Issued

2019-03-19 00:00:00

Abate by

2019-04-05 00:00:00

Penalty

Initial $5304.00 · Current $2000.00 Reduced

General-duty citation text

29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  At the location of 816 Funston in Wichita, KS, an employee was exposed to amputation hazards while engaged in sawing wood with the use of a Ridgid table saw,(Model-TS2424-1, SN-00075P0297). The employee was exposed in that the saw was being used without the blade guard in place.

Issued

2019-03-19 00:00:00

Abate by

2019-04-05 00:00:00

Penalty

Initial $3978.00 · Current $1500.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):   At the location of 816 Funston in Wichita, KS, employees were exposed to amputation hazards while using the air compressor (Model 5KC213AG201-A). The employees were exposed in that the pulleys on the air compressor were not guarded.

Issued

2019-03-19 00:00:00

Abate by

2019-04-05 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven -7 feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt:  At the location of 816 Funston in Wichita, KS, employees were exposed to amputation hazards while using the air compressor (Model 5KC213AG201-A). The employees were exposed in that the belts on the air compressor were not guarded.