OSHA Inspection: JIMMY'S CONTRACTOR SERVICES, INC.

Issued

2019-02-14 00:00:00

Abate by

2019-02-21 00:00:00

Penalty

Initial $2984.00 · Current $2984.00

General-duty citation text

29 CFR 1926.502(g)(1): When used to control access to areas where leading edge and other operations were taking place the controlled access zone was not defined by a control line or by any other means that restricts access.  a) Low Slope Roof: On or about January 15, 2019 and at times prior thereto; roofers were hand-welding seam plates to upper wall corners while leaning over the edge of a flat eight foot roof.     Note* Abatement certification IS required for this item.

Issued

2019-02-14 00:00:00

Abate by

2019-02-21 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.502(k)(7): The fall protection plan did not identify each location where conventional fall protection methods could not be used. These locations were not classified as controlled access zones and the employer did not comply with the criteria in paragraph (g) of this section.  a) Low Slope Roof: On or about January 15, 2019 and at times prior thereto; roofers were hand-welding seam plates to upper wall corners while leaning over the edge of a flat eight foot roof, but the Fall Protection Plan was not followed; a warning line was not installed in conjunction with use of safety monitors.     Note* Abatement certification IS required for this item.