Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: THERIAULT EQUIPMENT, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of THERIAULT EQUIPMENT, LLC in 120 CARIBOU RD, PRESQUE ISLE, ME 04769 (NAICS 423820). OSHA activity number 343797353.

Watch Theriault Equipment, LLC — free Get an email when a new federal OSHA severe-injury report for Theriault Equipment, LLC is published. One employer, no account, unsubscribe in one click.
Site address
120 CARIBOU RD
City
PRESQUE ISLE
State
ME
ZIP
04769
Mailing
120 CARIBOU RD, PRESQUE ISLE, ME 04769
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423820
Employees
22
Ownership type
A

6 citations on file for this inspection.

1910.178 Q01

Serious Gravity 5 1 instance 1 exposed
Issued
Penalty
Initial $5636.00 · Current $2818.00 Reduced
29 CFR 1910.178(q)(1):  Power-operated industrial truck(s) not in safe operating condition(s) were not taken out of service, and/or repairs were not made by authorized personnel:    Work Shop - The LP fuel tank on the Clark forklift was not seated on its locating pin and the mounting strap was not latched on the rear of the tank.
Recent events (2)
  • — I (S) $2818
  • — Z (S) $5636

1910.215 A04

Serious Gravity 5 2 instances 6 exposed
Issued
Penalty
Initial $4508.00 · Current $2254.00 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    Workshop - The work rests on the two bench grinders were not adjusted to within one-eighth of an inch from the grinding wheels.
Recent events (2)
  • — I (S) $2254
  • — Z (S) $4508

1910.215 B09

Serious Gravity 5 1 instance 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel and the present gap exceeded one quarter of an inch in width:  Workshop - The bench grinder did not have an adjustable tongue guard that could be adjusted to the ever decreasing diameter of the wheel and the present gap exceeded one quarter of an inch in width.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Other-than-serious 1 instance 22 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $0.00 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    Facility - The employer did not develop, implement, and/or maintain a written hazard communication program.
Recent events (2)
  • — I (O) $0
  • — Z (S) $5304

1910.1200 E01 I

Other-than-serious 1 instance 22 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet:    Facility - The employer did not compile a list of all the hazardous chemicals used in the facility.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.1200 H01

Other-than-serious 1 instance 22 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    Facility - Employees have not received hazard communication training regarding the hazardous chemicals in the work area.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343797353.