Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: MECO BUILDERS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MECO BUILDERS, INC. in 906 SHUGART RD., DALTON, GA 30720 (NAICS 238190). OSHA activity number 343814125.

Watch Meco Builders, INC. — free Get an email when a new federal OSHA severe-injury report for Meco Builders, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
MECO BUILDERS, INC.
Site address
906 SHUGART RD.
City
DALTON
State
GA
ZIP
30720
Mailing
42 N. PARK DRIVE, CHATSWORTH, GA 30705
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238190
Employees
10
Ownership type
A

4 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $3031.00 · Current $1819.00 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  (a) West side of the building: On or about 2/27/2019, and at times prior, the employer exposed employees to struck-by hazards, in that the use of personal head protection was not used by employees working directly under scaffold platform which was supported by the Lull model 844C-42.
Recent events (2)
  • — I (S) $1818.6
  • — Z (S) $3031

1926.451 C02 IV

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $3182.00 Reduced
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:  (a) West side of the building: On or about February 27, 2019, and at times prior, the employer exposed employees to fall hazards of 17 feet, in that employees were installing metal siding while working from a homemade scaffold platform which was supported by a Lull model 844C-42, which was not specifically designed for this type of work.
Recent events (2)
  • — I (S) $3182.4
  • — Z (S) $5304

1926.451 C02 V

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied:  (a) West side of the building: On or about February 27, 2019, and at times prior, the employer exposed employees to fall hazards of 17 feet, in that employees were installing metal siding while working from a homemade scaffold platform which was supported by a Lull model 844C-42, and the platform was not attached to the forks by any type of securing means which would prevent it from being dislodged during operations.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $3182.00 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level.  a) West side of the building: On or about February 27, 2019, and at times prior, the employer exposed employees to ejection and fall hazards of 17 feet, in that the use of personal fall protection systems was not enforced while the employees were installing metal siding from a homemade scaffold supported by a Lull, Model 844C-42.
Recent events (2)
  • — I (S) $3182.4
  • — Z (S) $5304

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343814125.