OSHA Inspection: CARDENAS, LLC

Issued

2019-05-13 00:00:00

Abate by

2019-06-28 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):  WORKSHOP:  The employer had not conducted the Workplace Hazard Assessment to determine the necessary and appropriate types of personal protective equipment (PPE) for employees.

Issued

2019-05-13 00:00:00

Abate by

2019-06-28 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.132(f)(1): The employer did not provide training to each employee who was required by this section to use personal protective equipment:  WORKSHOP:  The employer had not provided training and information to the employees required to wear personal protective equipment (PPE) on the Workplace Hazard Assessment for PPE.

Issued

2019-05-13 00:00:00

Abate by

2019-08-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  WORKSHOP:  The rotating parts, such as (but not limited to) mixing bowls, vertical shafts and hooks of the Hobart and Kitchenaid mixers were unguarded.

Issued

2019-05-13 00:00:00

Abate by

2019-08-30 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.219(k)(1): Clutches, cutoff couplings, or clutch pulleys had projecting parts which were not enclosed by a stationary guard:  WORKSHOP: The clutches on the Hobart mixers were not enclosed by a guard.