OSHA Inspection: ERIE LOGISTICS, LLC

Issued

2019-06-03 00:00:00

Abate by

2019-06-25 00:00:00

Penalty

Initial $6440.00 · Current $4830.00 Reduced

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator had been trained and evaluated as required by paragraph (l) through a certification that included the name of the operator, the date of the training, that date of evaluation, and the identity of the person(s) performing the training or evaluation:  a) On or about 04/24/2019, throughout establishment, employer did not certify that each forklift truck operator had been trained and evaluated in forklift operation at least every three years.   ABATEMENT CERTIFICATION REQUIRED

Issued

2019-06-03 00:00:00

Abate by

2019-06-18 00:00:00

Penalty

Initial $6440.00 · Current $4830.00 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  a) On or about 4/24/2019, in the Maintenance Bay, employees were exposed to caught by hazards when using the bench grinder with a worn out wheel to the extend that the work rest was not able to be adjusted to less than 1/2 inch.  ABATEMENT CERTIFICATION REQUIRED

Issued

2019-06-03 00:00:00

Abate by

2019-06-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  a) On or about 4/24/2019, in the Maintenance Bay, employees were exposed to being struck by flying debris when using the bench grinder with a worn out wheel to the extend that the tongue guard was not able to be adjusted to less than 1/2 inch.  ABATEMENT CERTIFICATION REQUIRED

Issued

2019-06-03 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(5)(ii): Lockout devices and tagout devices were not used for lockout and tagout purposes only:   a) On or about 04/24/2019, in the Maintenance Bay, maintenance employees were using Lockout locks to put the crane out of service instead of out of service locks.  NO ABATEMENT CERTIFICATION REQUIRED