Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: CHAPA QUIROGO, LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CHAPA QUIROGO, LLC in 551 S. INTERNATIONAL BLVD, PROGRESO LAKES, TX 78596 (NAICS 493130). OSHA activity number 344011259.

Watch Chapa Quirogo, LLC — free Get an email when a new federal OSHA severe-injury report for Chapa Quirogo, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
CHAPA QUIROGO, LLC
Site address
551 S. INTERNATIONAL BLVD
City
PROGRESO LAKES
State
TX
ZIP
78596
Mailing
P.O. BOX 820, PROGRESO LAKES, TX 78596
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493130
Employees
16
Ownership type
A

8 citations on file for this inspection.

1910.178 M07

Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $3000.00 Reduced
29 CFR 1910.178(m)(7): Brakes were not set and/or wheel blocks were not in place to prevent movement of trucks, trailers, or railroad cars while loading and unloading:    On May 15, 2019, and times prior there to, at the DDG Warehouse, the employer failed to provide wheel chocks to trucks, during transfer operations of grain.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5304

1910.219 E01 I

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5304.00 · Current $0.00 Reduced
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt:  On May 15, 2019, and times prior thereto, at the DDG Warehouse, the grain-machine conveyor belt on the floor, did not have a protective guard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5304

1910.219 D01

Deleted Serious Gravity 10 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o)(a):    On May 15, 2019, and times prior thereto, at the DDG Warehouse, the grain-machine pulley to the conveyor belt on the floor, did not have a protective guard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.253 B02 II

Serious Gravity 1 1 instance 3 exposed
Issued
Penalty
Initial $2273.00 · Current $1500.00 Reduced
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders was not located away from elevators, stairs, or gangways where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons:    On May 15, 2019, at the Pit adjacent to the corn elevator, an empty cylinder was stored where in could be knocked over and or damaged.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2273

1910.272 M01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3031.00 · Current $1600.00 Reduced
29 CFR 1910.272(m)(1)(i): Preventive maintenance procedures in the grain handling facility were not implemented to provide regularly scheduled inspections of the mechanical and safety control equipment associated with dryers, grain stream processing equipment:     On May 15, 2019, and times prior thereto, at the DDG Warehouse, the employer failed to implement preventive maintenance procedures to the grain-machine conveyor belt, prior to use for grain handling operations by employees.
Recent events (2)
  • — I (S) $1600
  • — Z (S) $3031

1910.303 F02

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2273.00 · Current $1500.00 Reduced
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:    On May 15, 2019, and times prior there to, at the Pit, Control Room A & B, the employer failed to mark and label all branch circuits to indicate its purpose.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $2273

1910.303 B07 I

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment:  On May 15, 2019, and times prior there to, at the Pit, Control Room A & B, the employer failed to install faceplates on the surface of a mounted electrical panel box.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.333 A02

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.333(a)(2): Where exposed live parts were not deenergized, other safety related work practices were not used to protect employees who could be exposed to the electrical hazards involved:  On May 15, 2019, and times prior thereto, at the DDG Warehouse, employees operated the grain-machine conveyor belt with live wires coming out of the junction box.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344011259.